Crawler Excavator HQ40

4.0ton Tailless Crawler excavator HQ40 is an earth moving machinery that excavates materials higher or lower than the bearing surface with a bucket and loads them into transport vehicles or discharges them to the stockyard. The Tailless Crawler excavator materials excavated by excavator are mainly soil, coal, sediment and pre loosened soil and rock

Tailless Crawler excavator HQ40 Main Spec :
Engine :Emission Standard:Euro 5,EPA4
Engine Make /Model :KUBOTA /D1703
Power /Rotation speed:18.5kw(25HP)@2200rpm
Number of cylinder:3
Type :In-line,water cooled, 4-stroke ,mechanical pump, normally aspirated
Max.torque:97.4N.m/1500rpm
Tailless Crawler excavator Displacement :1.647L
Maximum Travel speed(High/low):4.4/2.4km/h
Width of steel track shoe:300mm
Hydraulic Carrier roller(Each side):1
Supporting roller(Each side):4
Standard Bucket capacity:0.2m³
Tailless Crawler excavator Swing speed:9rpm
Maximum Grade ability:58%
Tailless Crawler excavator Ground pressure :32Kpa
Maximum Bucket digging force:30.4KN
Maximum Arm digging force:18.2KN
Hydraulic system pressure:22.5Mpa
Machine weight:3950kg
Tailless Crawler excavator Boom length:2535mm
Arm length:1400mm
Fuel tank capacity :42L
Hydraulic oil tank capacity:48.5L
Engine oil capacity :7L
Overall dimension (L*W*H):4915mm*1720mm*2525mm
Axle base(Track length on ground):1670mm
Length of rubber track:2154mm
Track gauge:1420mm
Minimum Ground clearance:295mm
Crawler excavators Swing radius at tail:860mm
Swing radius at front:2538mm
Crawler excavators Height of blade:350mm
Maximum Digging height:4800mm
Maximum Dumping height:3406mm
Maximum Digging depth:3208mm
Maximum Vertical digging depth:2957mm
Maximum Digging distance:5480mm
Maximum digging distance (on ground):5359mm
Minimum swing radius:2530mm
Max.height when min.swing radius:3655mm
Maximum Lifting height of blade:365mm
Maximum Cutting depth of blade:385mm
Boom swing angle(Left/Right):55°/65°

Tailless Excavator HQ40 Brochure Download