Aluminum Garden machine Use Pump Case

Aluminum Casting of Garden machine Use Pump Case ADC12, this part is used as engine housing on the garden instrument facility,assembling with the Motor End Cover, the die have 1 cavities.Because the leak testing is required,there will be many protrude from the surface, then while feeding the mold, as the injection gate is located at the bottom of the surface, so when the high-speed molten aluminum is injected, it will hit the big protruded feature, leading to eddy or turbulence, what's more, because of the big round feature, sometimes the molten aluminum will start to be solid at the back area of the feature though not fill sufficiently, leading to cold shut, or shrinkage porosity. Meanwhile, the top of the part will also be a position with high risk of feeding problem, as it is far-distance end on the part, the most difficult area for aluminum to reach. For such problem, the control method is to increase the temperature of the molten aluminum, to supervise the die temperature with infrared thermometer.

Then, during actual production, the operator should work under the process parameters set up by the engineering according to the operation instruction. Visual inspect the condition of the castings at the back surface, no defect such as cold shut is allowed. The inspector also should attach importance to the color difference from the back area and front area.For many areas of the part,tapping is needed, so the CNC workshop should take a couple of pcs to have trial machining to observe is there is porosity at this area.If the filling of the casting is not well, the bottom may happen to be broken, or with careful visual inspection, we may find color difference at the bottom, which like weld mark, how it comes? It is when two aluminum flow with different temperature come across but not merge well. In this case, the part will be easily broken at this joint surface, resulting in the scrap of the part.

Material: ADC12
Cavity Number: 1
Process Technology: High pressure Die Casting, Cold Chamber
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Surface Finish: Shot Blasting
Flow Processes: Die casting, Degating to remove the residual of the gate, Polishing and Deburring to remove the burrs, Polishing to remove the parting line, flash, Shot Blasting,CNC Milling,Cleaning, Packaging, Storaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Garden Machine Parts
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo