black Powder Coated Lamp Housing

Custom ADC12/A380/A360 Die Casting Heat Sink with Aluminium,

The part use ADC-12 as material, this aluminum alloy is Al-Si-Cu serial, the chemical composition of ADC-12 is: (Si)9.6~12.0,( ,Mg)≤0.3, (Cu)1.5~3.5, (Zn)≤1.0,( ,Fe)≤1.3,( ,Mn)≤0.5,( ,Ni)≤0.5,( ,Sn)≤0.3,( ,Pb) ≤0.1,( ,Cd) ≤0.005,( ,Al) the remaining.

Our Heatsink has the following features

1) unique design does not smoke wall, strengthen heat transfer. Thermal conductivity of aluminum 237W/MK, iron 80W/MK; material of high thermal conductivity and the radiator of the unique design, compared with traditional radiator heat dissipation of each piece not only increased, but not smoked wall, reduce consumer worries, improve the comfort, save the indoor space area. And it's an excellent product for low temperature heating.

2) the appearance is simple and elegant; set functional and decorative in one. Compared with the traditional radiator, consumers do not need to install the grille to increase the beauty, reduce the cost of decoration, increase the room area.

The die casting criterion carried on this part is Grade GB-CT4, according to the required tolerance and dimensions in terms of the prints, the part has difficulty on CNC machining, especially the rough turning.

Aluminum Die Casting Lamp Accessories: Aluminum Casting of LED Lighting

Die Casting Machine: 200 ton

6 parts per die
Material: ADC-12
Product Dimensions: Diameter 48mm*34.8mm
Casting Precision: Grade GB-CT4
Machining Precision: ±0.02mm
Technological Process: Die casting, Degate, Burring, Shot blasting,CNC Milling, Drill holes, Cleaning, Packing, Delivery
Control Measure: First item inspection, Routing inspection, Final item inspection, Incoming test and Outgoing quality control
Inspection Equipment: Calipers
Surface Treatment: Shot Blasting

Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo