Aluminum Casting Wiper Mount Adapter

Aluminum Casting Wiper Mount Adapter is a small part which is used as Mount head on windscreen wiper system. The technology for this part is high pressure Die Casting. Our factory specializes in this industry for more than 16 years. The material for this part is ADC-12, a most common aluminum alloy in die casting industry. This material has very good performance on fluidity, also, this material have very good capability of processability. It is always used for producing kinds of housing such as transmission system, motor housing, mounting bracket etc.

The Automotive Wiper Parts have requirement of assembling a spring pin by punching. Punching work is very dangerous to hａnd operation, so as to avoid any personal injury during production, the engineer will make strict work instruction, especially the request on the machine, the machine can only work when the two buttons are pressed together by the two hands, in this case, the industrial injury can be avoided.

The part has requirement of powder coating treatment, so the density of the part is very important, unqualified part usually have a lot of void inside. So the mold design is very important, such as the layout of the location of the injection gate, runner, venting system etc. The technology of powder coating has process of curing in oven under about temperature of 200 degree, in this case, the porosity inside of the parts will expａnd to get out, leading to bubble on the part surface, such defect is unacceptable.

What's more, for the design of the mold, should attach great attention to the parting lines, considering the convenience for operation of deburring, polishing.

By the way, as an experience die casting producer, we usually will run solidification analysis prior to the built of the die.

Material: ADC-12
Cavity Number: 4
Process Technology: High pressure die casting
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Surface Finish: Polishing, Shot Peening
Flow Processes: Die casting, Trimming, Deburring, Polishing, Vibratory deburring to make the surface smooth, Machining, Cleaning, Packing, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage
Application: Auto Parts
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo