special cast aluminum die casting lamp parts

Machining Die Casting Lighting Parts for Heat Sink,

Our Heatsink must have below standard.

The Heatsink surface has no harmful substance volatilization, and has no harm to environment and human body. According to the test report of the national quality supervision and inspection center with the national radiator radiator Committee recommended products of the company, in the company's products, the surface of the radiator is released into the air pollutant limits "of the requirements of formaldehyde is less than 0.03, the actual value is less than or equal to 0.017; benzene requirement is less than 0.04, the actual value is less than or equal to 0.001; for toluene is less than 0.07, the actual value is less than or equal to 0.006; for xylene is less than or equal to 0.07, the actual value is 0.004; total volatile organic compounds (TVOC) is less than or equal to 0.20, the actual value is less than or equal to 0.017. Therefore, we can say that the products produced by the company, in the process of using no harmful substances volatilization. No harm to the human body and the environment, environmental protection and pollution-free green products.

The die casting criterion carried on this part is Grade GB-CT4, according to the required tolerance and dimensions in terms of the prints, the part has difficulty on CNC machining, especially the rough turning.

This part is made of high quality aluminum, good thermal conductivity. can reduce the risk of hardware failure due to overheating. Maximize surface area designed in contact with cooling air. and widely used for computer, power transistor.

Aluminum Die Casting Lamp Accessories: Aluminum Casting of LED Lighting

Die Casting Machine: 280 ton

4 parts per die
Material: A380
Product Dimensions: Diameter φ36mm*34.3mm
Casting Precision: Grade GB-CT4
Machining Precision: ±0.02mm
Technological Process: Die casting, Degate, Burring, Shot blasting, CNC Machining, Drill holes, Cleaning, Packing, Delivery
Control Measure: First item inspection, Routing inspection, Final item inspection, Incoming test and Outgoing quality control
Inspection Equipment: Calipers
Surface Treatment: Shot Blasting

Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo