Welcome Customer !

Membership

Shanxi Haina Hi-Tech Precision Machinery Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 管磨机

Xwboo>Products

Shanxi Haina Hi-Tech Precision Machinery Co., Ltd.Free·1YRS

  • E-mail

    market@sxhngk.com

  • Phone

    86-351-7175629

  • Address

    422, Entrepreneurship Training Building, Bei Zhonghuan Street, Taiyuan Shanxi, China

Contact Now

JCOE Large Diameter LSAW Pipe Mill

Model
Nature of the Manufacturer
Other
Product Category
LSAW Pipe Mill
Place of Origin
City, Province
Overview
There are two production processes for LSAW pipe i.e., JCOE and RBE. The advantages of JCOE production process are that it can produce more than 30mm thick steel pipe, which is suitable for the production of extra thick wall steel pipe; the disadvantages are low production efficiency (10 pieces...
Product Details

LSAW pipe mill has special advantages in the mill. Compared with ERW, the quality and energy consumption of Straight seam submerged-arc pipe is easier to be controlled, and is welded better and low consumption. The welding seam of LSAW pipe overcomes the shortages of long welding seam and difficult inspection on spiral welding seam after inbuilt. Compared with UOE and JCOE, the investment cost and production cost are low. The quality of LSAW pipe welding seam is the best in all welding seam technology. LSAW pipe is the most reliable and there is no circular interface welding seam on the pipe, which is easy to weld, inspect, maintain and repair. The pipe produced by the mill just covers most pipes which are currently used by oil, gas casing. The mill also has a good market prospect.

There are two production processes for LSAW pipe i.e., JCOE and RBE.

The advantages of JCOE production process are that it can produce more than 30mm thick steel pipe, which is suitable for the production of extra thick wall steel pipe; the disadvantages are low production efficiency (10 pieces / hour) and large investment. It is usually used for the production of straight seam submerged arc steel pipe with diameter range of 508 – 1422 mm, wall thickness of 8 – 40 mm and length of 10 - 12.5 m.

Production Process

Plate Ultrasonic Flaw Detecting → Plate Edge Milling → Front Pre Bending → JCO Pipe Forming → Pre Welding → Pipe Internal Welding → Pipe External Welding → Weld Ultrasonic Flaw Detecting → Pipe Weld (X-Ray) Flaw Detecting → Pipe Expanding → Hydrostatic Testing → Pipe Pressure Straightening → Pipe Rounding → Pipe End Internal And External Weld Flattening → Pipe Chamfering → Pipe Ultrasonic Phased Array Detecting → Pipe Weld X-Ray Detecting → End X-Ray Photographing → Weighing And Length Measuring → Pipe Marking → Delivering


Similar Product Recommend