RE-2010 Rotary Evaporator

NegotiableUpdate on December 14

Model

Nature of the Manufacturer: Manufacturer

Product Category: Rotary Evaporator

Place of Origin: City, Province

Online Consult Contact Information

Overview

RE-2010 Rotary Evaporator

Product Details

Product Description

RE-2010 rotary evaporator mainly used for continuous distillation of a large amount of volatile solvent under negative pressure. Especially for the concentration of extract liquor and distillation of receive liquid when chromatograph, it can isolate and purify reaction product. In reduced pressure condition, when solvent distillation, distillation flask in continuous rotation, the distillation flask is a pyriform or round-bottom flask who is connected to vacuum pump by a snakelike condenser pipe, the other open mouth of condenser pipe is connected to receiving flask to receive evaporated organic solvent. There is a three-way valve between condenser pipe and vacuum pump, when system connect to air, take down distillation flask and receiving flask to transfer solvent. Please reduce pressure first before rotate distillation flask; and please power off first before connect to air, to prevent the rotating distillation flask from falling off. Thermostatic water bath is the heat source for distillation.

Product Application

RE-2010 rotary evaporator mainly used in medicine, chemical engineering,biopharmacy industries for the concentration, crystallization, drying, separation and solvent recovery, especially suitable for concentrate and purify high temperature easily decomposed material.

Product Parts

High-efficient double condenser ensures high recovery rate.

Newest research rotary evaporator. Heating kettle is made from Teflon recombination material, whole sealing heating mode to prevent dry running, which is applicable of water and oil.

Digital display of both rotary speed and temperature is clear and convenient. Electronic stepless speed regulation operates stably; Humanized operation system makes it easy to handle.

Teflon and fluororubber are double sealed to maintain high vacuum.

Product Parameters

Basic Parameter	Model	RE-2010
	Glass Material	GG-17
	Support Material	Aluminium Alloy
	Inner Container Material	Aluminium alloy + Teflon recombination pot, whole sealing heating
	Rotary Bottle Volume	1L 24#standard port(optional 500-3000ml)
	Receiving Flask Volume	1L 35# ball milling port
	Rotary Power	40W
	Rotary Speed	20-195rpm
	Evaporation Ability	20ml/min (water)
	Vacuum Degree	0.098Mpa
	Heating Power	1.5KW
	Bath Kettle Temp. Control Range	0-99℃
	Temp. Control Accuracy	±1℃
	Lifting Stroke	100mm+150mm(sliding lift + manual lift)
	Voltage/Frequency (V/Hz)	220V/50Hz
	Overall Dimension (mmmmmm)	550400(780-1040) LengthWidthHeight
	Package Dimension (mmmmmm)	720525385
	Package Weight (KG)	20
FunctionalConfiguration	Speed Regulation Mode	Stepless Speed Regulation
	Temperature Display Mode	PT100 Sensor Digital Display
	Temperature Control Mode	Intelligent Temperature Control
	Sealing Mode	Bothway sealing by Teflon + Fluorine Rubber
	Lifting Mode	Manual weight balancing
	Condenser	Vertical type condenser 85*430mm, inclined condenser is choosable
	Continuous Charging	19# charging valve
	Splash-proof Function	Organic Transparent Cover
	Safety Function	Overload Protection (fuse)
Our company’s laboratory glass and laboratory instruments are independent research and development, available for custom-made according to client requirements.

Product Parts

Host	1	Rotary Bottle	1
Electric Cabinet	1	Recycling Bottle	1
Special Sealing Ring	1	Condenser Pipe	1
Sealing Gasket	1	Suction Pipe	1
Bottle Clamp	2	Charge Pipe	1
Protective Pipe 3A	1	Protective Pipe	1
Thermostat Water Bath Kettle	1	Special Components (additional Purchase)

Matching Products

Chiller

Rotary Vane Vacuum Pump

Quality Certification

Package & Delivery

RE-2010 Rotary Evaporator

Product Description

Product Application

Product Parts

Product Parameters

Product Parts

Matching Products

Quality Certification

Package & Delivery

Send Message