Model: FAR Series Dual-axis Dual-arm Type ( Powerful Pneumatic Brake )FAR(s)-125/125B/170A/170/170BFAR(s)-210/210B
PRODUCT FEATURES:
▶ 1. Both the tilting axis and rotary axis use radial & axial bearings.
▶ 2. Because the tilting axis normally needs to bear heavy load, Japanese-made worm and worm gear are employed to improve wear resistance and precision of tilting axis. standard component (It's wear life is 2.6 times longer than aluminum bronze PBC3.)
▶ 3. A hydraulic brake for tilting axis is optional.
PRODUCT CATEGORIES

DIMENSION




SPECIFICATION
Item/Model | UNIT | FAR(s)-125/125B | FAR(s)-170A | FAR(s)-170/FAR(s)-170B | FAR(s)-210 |
Table Diameter | MM | ø125 | ø170 | ø170 | ø210 |
Diameter of Table Central Hole | MM | ø35H7 | ø67 | ø67 | ø67 |
Inner Diameter of Mandrel Sleeve | MM | - | ø40H7 | ø40H7 | ø40H7 |
Diameter of Center Through Hole | MM | ø25 | ø40 | ø40 | ø40 |
Table Height (Horizontal) | MM | 215 | 245 | 270 | 270 |
Table T-slot Width | MM | 12H7 | 12H7 | 12H7 | 12H7 |
Guide Block Width | MM | 14h7 | 18h7 | 18h7 | 18h7 |
Axis | - | Rotation | Tilt(-30°~+120°) | Rotation | Tilt ±100º | Rotation | Tilt ±100º | Rotation | Tilt ±100º |
Min. Increment | deg. | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
Indexing Precision(while tilt 0°~+90°) | sec. | 40 | 60 *¹ | 20 | 60 *¹ | 20 | 60 *¹ | 20 | 60 *¹ |
Repeatability | sec. | 6 | 8 | 6 | 8 | 6 | 8 | 6 | 8 |
Clamping System (Pneumatic) | kgf/cm² | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 / Hyd.35 (optional) |
Clamping Torque | kgf·m | 13 | 31 | 25 | 31 | 31 | 31 | 31 | 31 / Hyd.55 |
Servo Motor Model | FANUC | Taper/Straight shaft | αis4/βis4 | αiF4 / ßiS8 | αiS4 / ßiS4 | αiF4 / ßiS8 | αiF4 / ßiS8 | αiF8 / αiS12 / ßiS12 | αiF4 / ßiS8 | αiF8 / αiS12 / ßiS12 |
MITSUBISHI | Taper/Straight shaft | HG/HF-75/105 | HG/HF-54/104 | HG/HF-75/105 | HG/HF-54/104 | HG/HF-54/104 | HG/HF-104 | HG/HF-54/104 | HG/HF-104 |
Speed Reduction Ratio | - | 1:60 | 1:90 | 1:72 | 1:120 / SIEMENS 1:90 | 1:90 | 1:90 | 1:90 | 1:90 |
Max. Rotation Rate of Table (Calculate with Fanuc α Motor) | r.p.m | 44.4 *(33.3) | 44.4 *(33.3) | 33.3 *(33.3) | 33.3 *(16.6) | 33.3 *(33.3) | 33.3 *(16.6) | 33.3 *(33.3) | 33.3 *(16.6) |
Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec² | 0.97 | 2.2 | 2.7 | 4.13 |
Allowable Workpiece Load | 0° Horizontal | kg | 50 | 60 | 75 | 75 |
0°~90°Tilt | kg | 35 | 40 | 50 | 50 |
Allowable Load(with Rotary Table Clamping) | F | kgf | 400 | 600 | 750 | 750 |
FxL | kgf·m | 31 | 31 | 31 | Pne.31 / Hyd.55 |
FxL | kgf·m | 13 | 25 | 31 | 31 |
Driving Torque(Rotary axis) | kgf·m | 9 *(3.7) | 18 *(14.6) | 18 *(14.6) | 18 *(14.6) |
Net Weight (servo motor excluded) | kg | 97/- | 125 | 153 | 160 |
FACTORY SHOW
