Model: HR Series: Ø210-800 Powerful Hydraulic BrakeThe worm shaft is made of case-hardened steel. It is a specially designed and profile-corrected gear arrangement for higher efficiency, higher load carrying capacity, and precise accuracy. The worm gear is made of special non-ferrous alloy with high anti-wearing. A special profile on worm gear ensures improved gear engagement between the worm gear and worm shaft while guaranteeing improved accuracy, lesser wear & tear, and uniform load distribution. This type of tr......
Features
▶ 1.Made-in-Japan and high-precision dual lead worm shaft and worm gear made of high-tension and high wear-resisting brass, providing high stability.
▶ 2.Equipped with radial and axial bearing which support vertical & horizontal heavy duty cutting.
▶ 3.Extra large bore, creating more room to optimize fixture & processes.
▶ 4.The bearing preloaded in radial and axial directions can bear more weight with less deformation, superior than a normal bearing.
▶ 5.Leak proof sheet metal
▶ 6.Perfect long-last silver pearl lacquer. The anti-erosion lacquer keeps your machine looking new.
▶ 7.Powerful hydraulic brake and right side motor, left side motor, back side motor can choose.

Specification
Item/Model | Unit | HR(s)-210R/L | HR(s)-255 | HR-320 |
Table Diameter | mm | ø210 | ø255 | ø320 |
Diameter of Table Central Hole | mm | ø67 | ø110 | ø150 |
Inner Diameter of Mandrel Sleeve | mm | ø40H7 | ø80H7 | ø120H7 |
Diameter of Center Through Hole | mm | ø40 | Big Boreø80 | Big Boreø120 |
Center Height (Vertical) | mm | 160 | 160 | 210 |
Table Height (Horizontal) | mm | 152 | 200 | 235 |
Table T-slot Width | mm | 12H7 | 12H7 | 14H7 |
Guide Block Width | mm | 18h7 | 18h7 | 18h7 |
Min. Increment | deg. | 0.001 | 0.001 | 0.001 |
Indexing Precision | sec. | 20 | 15 | 15 |
Repeatability | sec. | 4 | 4 | 4 |
Clamping System (Pneumatic) | kg/cm² | 25 | 35 | 35 |
Clamping Torque | kg-m | 35 | 70 | 115 |
Servo Motor Model | FANUC | Taper shaft | α4i/α8i/ß8iS | α8i/ß8iS | α12i/ß22iS(Straight shaft) |
MITSUBISHI | Taper shaft | HF‐54/104 | HF‐104/154 | HF‐204(Straight shaft) |
Speed Reduction Ratio | ‐ | 1∶90 | 1∶120 | 1∶120 |
Max. Rotation Rate of Table (Calculate with Fanuc α Motor) | r.p.m | 44.4 | 33.3 | 25 |
Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec² | 8.3 | 20.3 | 44.8 |
Allowable Workpiece Load | Vertical | kg | 75 | 100 | 150 |
with Tailstock | kg | 150 | 250 | 350 |
Horizontal | kg | 150 | 250 | 350 |
Allowable Load(with Rotary Table Clamping) | F | kgf | 1450 | 2000 | 3000 |
FxL | kgf.m | 100 | 112 | 300 |
FxL | kgf.m | 35 | 70 | 115 |
Strength of worm gears | kg.m | 18 | 55 | 80 |
Net Weight (servo motor excluded) | kg | 55 | 109 | 204 |
Item/Model | Unit | HR-400 | HR-500R | HR-630R | HR-800R |
Table Diameter | mm | ø400 | ø500 | ø630 | ø800 |
Diameter of Table Central Hole | mm | ø150 | ø250 | ø325 | ø395 |
Inner Diameter of Mandrel Sleeve | mm | ø120H7 | ø220H7 | ø280H7 | ø350H7 |
Diameter of Center Through Hole | mm | Big Boreø120 | Big Boreø220 | Big Boreø280 | Big Boreø350 |
Center Height (Vertical) | mm | 255 | 310 | 400 | 470 |
Table Height (Horizontal) | mm | 250 | 290 | 325 | 350 |
Table T-slot Width | mm | 14H7 | 18H7 | 18H7 | 18H7 |
Guide Block Width | mm | 18h7 | 18h7 | 18h7 | 18h7 |
Min. Increment | deg. | 0.001 | 0.001 | 0.001 | 0.001 |
Indexing Precision | sec. | 15 | 15 | 15 | 15 |
Repeatability | sec. | 4 | 4 | 4 | 4 |
Clamping System (Pneumatic) | kg/cm² | 35 | 35 | 35 | 35 |
Clamping Torque | kg-m | 200 | 370 | 800 | 800 |
Servo Motor Model | FANUC | Taper shaft | α12i/ß22is(Straight shaft) | α12i / ß22iS | α12i / ß22iS | α22i |
MITSUBISHI | Taper shaft | HF‐204(Straight shaft) | HF‐204 | HF‐204 | HF‐204 |
Speed Reduction Ratio | ‐ | 1∶120 | 1∶180 | 1∶180 | 1∶180 |
Max. Rotation Rate of Table (Calculate with Fanuc α Motor) | r.p.m | 25 | 16.6 | 16.6 | 11.1 |
Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec² | 100 | 187.5 | 396.9 | 1200 |
Allowable Workpiece Load | Vertical | kg | 200 | 250 | 400 | 800 |
with Tailstock | kg | 500 | 600 | 800 | 1500 |
Horizontal | kg | 500 | 600 | 800 | 1500 |
Allowable Load(with Rotary Table Clamping) | F | kgf | 4000 | 4000 | 5000 | 5000 |
FxL | kgf.m | 400 | 370 | 800 | 8000 |
FxL | kgf.m | 200 | 370 | 800 | 800 |
Strength of worm gears | kg.m | 170 | 250 | 420 | 800 |
Net Weight (servo motor excluded) | kg | 286 | 405 | 692 | 991 |
Dimension








Package

Factory show
