Welcome Customer !

Membership

WUXI FAGOR TECHNOLOGY COMPANY LIMITED
Free Member ·1YRS
WuXi,JiangSu
Manufacturer

Main Products: CNC lathe|Vertical Machining Center

Xwboo>Products

WUXI FAGOR TECHNOLOGY COMPANY LIMITEDFree·1YRS

  • E-mail

    jason@wxfagor.com

  • Phone

    86-510-68088084

  • Address

    No. 556-505, East Canal Road, Liangxi District, Wuxi, Jiangsu, China

Contact Now

CNC TOOL MAGAZINE

Model
Nature of the Manufacturer
Manufacturer
Product Category
CNC TOOL MAGAZINE
Place of Origin
City, Province
Overview
Horizontal disc type magazineServo type vertical disc magazine Inverter type vertical disc magazine Hydraulic vertical horizontal reversible tool Chain swing magazineChain slide magazineChain type vertical magazineHorizontal chain type magazineVertical disc type magazineHorizontally mounted type magazine Umbrella chain type magazineServo type vertical disc magazine Ufo-type magazineCarousel type magazineChain type hats upside down magazine
Product Details

BT40 ROTARY DISC TYPE TOOL MAGAZINE

CNC TOOL MAGAZINE

PRECAUTIONS

1. Check the oil level of ATC

In order to ensure the smooth functioning of ATC,must regularly check the oil level every month in the correct state.Oil mirror in front of the ATC,normal oil level near the center of the red dot down ,the minimum oil level can not be less than the visible range of sight glass.

2. Preview the voltage

In front of the magazine wiring connected to the power,first check whether the motor have good voltage value with the host voltage matching.

3. ATC origin position check

In order to make the tool change operation safety, the general design uses only the original starting point, such as tool change point is not staying home position will not move;Power to the host must be cut off before treatment , after that manually rotate the tool change motor , so that the signal back to the original position.

4. Before the tool is placed in the pocket, make sure the tool size, weight and length, and to ensure screws being screwed into the handle,still to ensure that the size from the shank end to rivet (A) meet the requirements of the machine.Shown in figure,for example:BT40 A=100.4±0.2mm,To ensure the normal broach,when the tool change.The concentricity of the position center in arm shank and spindle center should be within the φ0.02mm.

5. The flow and pressure of external air supply to meet the requirements:air pressure to be stable,Pressure Mpa = 0.5-0.6Mpa,moisture can’t be contained in the air,to avoid damage to the cylinder valve rust.

40#CIRCULAR TOOL MAGAZINE OUTLINE DRAWING

CNC TOOL MAGAZINE

CNC TOOL MAGAZINE

CNC TOOL MAGAZINE

CNC TOOL MAGAZINE

CNC TOOL MAGAZINE

PRODUCT SHOW

    CNC TOOL MAGAZINECNC TOOL MAGAZINE

FACTORY SHOW

CNC TOOL MAGAZINECNC TOOL MAGAZINECNC TOOL MAGAZINE

Similar Product Recommend