RMP60

NegotiableUpdate on June 07

Model

Nature of the Manufacturer: Manufacturer

Product Category: RENISHAW

Place of Origin: City, Province

Online Consult Contact Information

Overview

The RMP60 is a compact spindle probe with radio signal transmission and offers automated part set-up and in-cycle gauging on machining centres including 5-axis machines.The RMP60 combines Renishaw’s traditional kinematic resistive probe mechanism with a secure and unique frequency hopping transmission protocol; ideal for the modern machine shop and harsh environments where line-of-sight between probe and interface is not always possible.

Product Details

KEY FEATURES AND BENEFITS

Proven kinematic design
Secure frequency hopping spread spectrum (FHSS)
Globally recognised 2.4 GHz wavebａnd – compliant with radio regulations in all major markets
Compact design
Various activation options and adjustable trigger force
1.00 µm 2σ repeatability

DIMENSIONS

RMP60 SPECIFICATION

Principal application		Workpiece inspection and job set-up on multi-tasking machines, machining centres and gantry machining centres.
Transmission type		Frequency hopping spread spectrum (FHSS) radio Radio frequency 2400 MHz to 2483.5 MHz
Radio approval regions		China, Europe (all countries within the European Union), Japan and USA. For details about other regions, contact Renishaw.
compatible interfaces		RMl and RMl-Q
perating range		Up to 15m (49.2ft)
Recommended styli		Ceramic, lengths 50 mm (1.97 in) to 150 mm (5.91 in)
Weight without shank (including batteries)		901g(31.79 oz)
Switch-on/switch-off options		Radio on → Radio off or timer off Spin on → Spin off or timer off Shank switch on → Shank switch off
Battery life (2 × AA 3.6 V Lithium-thionyl chloride)	Standby life	890 days maximum, dependent on switch-on/switch-off option.
	Continuous use	1710 hours maximum, dependent on switch-on/switch-off option.
Sense directions		±X, ±Y, +Z
Unidirectional repeatability		1.00 µm (40 µin)2s (see note 1)
Stylus trigger force(see notes 2 and 3) XY low force XY high force +Z direction		0.75 N,76 gf(2.70 ozf) 1.40 N,143 gf (5.04 ozf) 5.30 N,540 gf (19.06 ozf)
Sealing		IPX8(EN/IEC 60529)
Operating temperature		+5°Cto +55°C(+41°F to+131°F)

Note 1 Performance specification is tested at a standard test velocity of 480 mm/min (18.9 in/min) with a 50 mm stylus. Significantly higher velocity is possible depending on application requirements.

Note 2 Trigger force, which is critical in some applications, is the force exerted on the component by the stylus when the probe triggers. The maximum force applied will occur after the trigger point (overtravel). The force value depends on related variables including measuring speed and machine deceleration.

Note 3 These are the factory settings; manual adjustment is possible. For more details, refer to the RMP60 installation guide.

PRODUCT SHOW