For workpiece inspection and job set-up on all sizes of machining centres and small to medium multi-tasking machines.Compact 3D touch-trigger probe.Reliable modulated optical transmission.Outstanding performance for less scrap and higher profits.
FOR WORKPIECE SET-UP INSPECTION
The OMP60 is a compact 3D touch-trigger probe with optical signal transmission that is used for workpiece set-up inspection on a wide range of medium and large machining centres. It offers users an up to 90% reduction in set-up time, as well as a reduction in scrap and fixture costs.
Compatibility with all Renishaw optical receivers (legacy and new generation) enables users to easily upgrade existing installations.
FEATURES AND BENEFITS
Proven kinematic design.
Exceptional resistance to light interference with modulated transmission.
360° transmission envelope.
Compact design.
Various activation options and adjustable trigger force.
1 μm 2σ repeatability.
SPECIFICATION
Optical setting | Modulated | Legacy |
Principal application | Workpiece inspection and job set-up on all sizes of machining centres and small to medium multi-tasking machines. |
Transmission type | 360° infrared optical transmission (modulated or legacy) |
Compatible interfaces | OMI-2, OMI-2T, OMI-2H, OMI-2C or OSI/OMM-2 | OMI or OMM/MI 12 |
Operating range | Up to 6 m (19.7 ft) |
Recommended styli | Ceramic, lengths 50 mm (1.97 in) to 150 mm (5.91 in) |
Weight without shank (including batteries) | 885 g (31.22 oz) |
Switch-on/switch-off options | Optical on → Optical off or timer off Spin on → Spin off or timer off Shank switch on → Shank switch off |
Battery life (2 × AA 3.6 V lithiumthionyl chloride) | Standby life | 1767 days maximum, dependent on switch-on/switch-off option. |
Continuous use low power | 690 hours maximum, dependent on switch-on/switch-off option. | 880 hours maximum, dependent on switch-on/switch-off option. |
Sense directions | ±X, ±Y, +Z |
Unidirectional repeatability | 1.00 μm (40 μin) 2σ (see note 1) |
Stylus trigger force (see notes 2 and 3) XY low force XY high force +Z direction | 0.75 N, 76 gf (2.70 ozf) 1.40 N, 143 gf (5.04 ozf) 5.30 N, 540 gf (19.06 ozf) |
Sealing | IPX8 (EN/IEC 60529) |
Operating temperature | ‘+5 °C to +55 °C (+41 °F to +131 °F) |
Note 1 Performance specification is tested at a standard test velocity of 480 mm/min (18.9 in/min) with a 50 mm stylus. Significantly higher velocity is possible depending on application requirements.
Note 2 Trigger force, which is critical in some applications, is the force exerted on the component by the stylus when the probe triggers. The maximum force applied will occur after the trigger point (overtravel). The force value depends on related variables including measuring speed and machine deceleration.
Note 3 These are the factory settings, manual adjustment is possible.
OMP60 DIMENSIONS
PRODUCT SHOW