Restrained Flange Adaptor for PE

Restrained Flange Adaptor for PE

It's suitable for use with water, drainage, sewage... pipe systems.

The products could be coated with blue, black, red epoxy or according to customer requirements.

Package is polywood case with bubble film for each item or at customers' request.

Restrained Flange Adaptor for PE Pipes of EN12201/ISO4427

Features 1.The restraint system is effective independent of the pipe sealing and is achieved by tightening the lock ring. 2.The pipe end can be pushed into the sealing chamber without major effort.The flat gasket is already mounted on the flange. 3.For thin-walled PE-pipes (up to 3mm wall thickness) and low internal pressure as well as the use of support liners is required.

Restrained Flange Adaptor for PE

Standard: ISO2531，EN545

Pressure: PN10/PN16

Body material: Ductile iron with FBE ( fusion bonded epoxy) coating or Epoxy painting; Gaskets are NBR or EPDM;

Gripping teeth material: Brass.

Bolts and Nuts: Carbon steel with galvanized zinc plated G4.8/G8.8, or SS304/SS316

Package: Wooden cases and protection layer.

Application: Restrained flange adaptorg is used for connecting PE pipe. The restrained brass can fastend the pe pipe better, they perform better work than quick adaptor for PE pipes.