KN-2440 Oxidation Stability Tester for Mineral Insulating Oil

KN-2440 Oxidation Stability Tester for Mineral Insulating Oil
Overview
KN-2440 Oxidation Stability Tester for Mineral Insulating Oil conforms to the ASTM D2440 Standard Test Method for Oxidation Stability of Mineral Insulating Oil . This apparatus covers the resistance of mineral transformer oils to oxidation under prescribed accelerated aging conditions. Oxidation stability is measured by the propensity of oils to form sludge and acid products during oxidation. This test method is applicable to new oils, both uninhibited and inhibited, but is not well defined for used or reclaimed oils.
Features
1, Oil bath heating, without refueling, energy saving and easy to use
2, PID control can quickly remain stable after reaching the target temperature, saving waiting time.
3, Operates at 110℃ with ±0.2℃ stability
4, The oxidation process adopts digital stopwatch to do time keeping
5, We use air to do the sample cooling ,less than four hours chilling.
6, The flow meter is equipped with voltage and steady flow stabilization device. the precision of flow is high.
Main Technical Parameters
1, Rated Voltage: AC220V±10% 50HZ
2, Heating power: 2200W
3, Temperature accuracy: 95℃ ±0.1℃
4, Temperature control mode: Digital display temperature controller
5, Bath hole: 6
6, Stirring mode: Pump circulation
7, Cooling mode: Air cooling
8, Ambient requirement: Temperature:10~50℃; Humidity≤85%