KN-3612 GC for Analysis of dissolved gases in transformer oil

KN-3612 GC for Analysis of dissolved gases in transformer oil
Introduction:
KN-3612 conforms to ASTM D3612 Analysis of Gases Dissolved in Electric Insulating Oil by Gas Chromatography. It is used for the measurement of gases dissolved in electrical insulating oil having a viscosity of 20 cSt (100SUS) or less at 40℃ (104℉)
Oil and oil-immersed electrical insulation materials may decompose under the influence of thermal and electrical stresses, and in doing so, generated gaseous decomposition products of varying composition which dissolve in the oil. The nature and amount of the individual component gases that may be recovered and analyzed maybe indicative of the type and degree of the abnormality responsible for the gas generation of specific gases over time are also used to evaluate the condition of the electric apparatus.
The performance and longevity of electrical transformers depend upon the stability of the oil used as an insulator and coolant. Normal transformer operation subjects the oil to electrical and mechanical stresses, causing aging, oxidation, vaporization, electrolytic action, and decomposition. These can change the oil’s chemical properties and result in gas formation. Analyzing these dissolved gases provides crucial diagnostic information about the transformer’s current and future stability – and helps you determine whether a transformer should be decommissioned.
Sample type:
Electric Insulating Oil
Application:
Custom configured analyzer for the analysis of dissolved gases in transformer oil.
Components: H2, O2, N2, CH4, CO, CO2, C2H2, C2H4, C2H6. C3 and C4 components optional
Minimum Detectability:
Component | Detection Limit GAS(ppm) |
CO2 | 5 |
Acetylene | 1 |
Ethylene | 1 |
Ethane | 1 |
Hydrogen | 2 |
Oxygen | <50 |
Nitrogen | <50 |
Methane | 1 |
CO | 2 |
Chromatogram
