The automatic blow molding machines, A wide variety of materials can be used for the machine, which are suitable for producing multi-type products in small batches. The clamping system is a high-precision single-station linear guide, extrusion system using a hard gear reducer and inverter imported from Japan.The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve.The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts. | | | ES-45D | extruing system | max.product volume | L | 1 | output(dry cycle) | pc/hr | 900*2 | screw diameter | mm | 45 | screw L/D ratio | L/D | 24 | screw driving power | kw | 5.5-7.5 | screw heating power | kw | 4.4 | No.of heating zone | zone | 2 | output of HDPE | kg/hr | 22 | single die head | max.die diameter | mm | 60 | No.of heating zone | zone | 2 | die head heating power | kw | 1.8 | bi-die head | central distance of tetra-die head | mm | 120 | max.die diameter | mm | 40 | No.of heating zone | zone | 3 | die head heating power | kw | 2.5 | tri-die head | central distance of tetra-die head | mm | 70 | max.die diameter | mm | 35 | No.of heating zone | zone | 3 | die head heating power | kw | 2.5 | tetra-die head | central distance of tetra-die head | mm | 60 | max.die diameter | mm | 20 | No.of heating zone | zone | 3 | die head heating power | kw | 4 | clamping system | clamping force | kn | 70 | platen distance | mm | 120-270 | max.dimension of mold | mm | 260*300 | oil pump driving power | kw | 4 | power | total power | kw | 16 | blowing pressure | Mpa | 0.6 | air consumption | m3/min | 0.3 | cooling water pressure | Mpa | 0.2-0.3 | cooling water consumption | L/min | 50 | machine dimension | (L*W*H)m | 2.3*1.5*2.0 |
|