Welcome Customer !

Membership

Shenzhen ES AQUA Machinery Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 饮料灌装设备

Xwboo>Products

Shenzhen ES AQUA Machinery Co., Ltd.Free·1YRS

  • E-mail

    Esaqualtd@gmail.com

  • Phone

    0086-755-33149322

  • Address

    Leyu Industrial Zone , Leyu Town , Zhangjiagang City , Jiangsu Province , 215622, China

Contact Now

ES-IM1800NInjection Molding Machine

Model
Nature of the Manufacturer
Other
Product Category
Injection Molding Machine
Place of Origin
City, Province
Overview
ES-IM1800N
Product Details

ES-IM1800N

Horizontal injection molding machine:
1, direct pressure horizontal clamping, horizontal injection.
2, for no insert product batch production.
3, the whole process automatic control, the efficiency
4, high, small, small footprint.
Injection molding machines, horizontal injection molding machine, vertical injection molding 
machine, all-electric injection molding machines, all-electric injection molding machine, 
energy saving injection molding machine, rapid prototyping machines, plastic molding 
machines,High-speed precision molding machines, large two-plate injection molding 
machine!    Injection molding machines can fasten the molds in either a horizontal or 
vertical position. The majority of machines are horizontally oriented, but vertical machines 
are used in some niche applications such as insert molding, allowing the machine to take 
advantage of gravity. Some vertical machines also don't require the mold to be fastened. 
There are many ways to fasten the tools to the platens, the most common being manual 
clamps (both halves are bolted to the platens); however hydraulic clamps (chocks are 
used to hold the tool in place) and magnetic clamps are also used. The magnetic and 
hydraulic clamps are used where fast tool changes are required.The person designing 
the mold chooses whether the mold uses a cold runner system or a hot runner system to 
carry the plastic from the injection unit to the cavities. A cold runner is a simple channel 
carved into the mold. The plastic that fills the cold runner cools as the part cools and is 
then ejected with the part as a sprue. A hot runner system is more complicated, often 
using cartridge heaters to keep the plastic in the runners hot as the part cools. After the 
part is ejected, the plastic remaining in a hot runner is injected into the next part. 

If you need more detail technical information, please kindly contact our company team. Thank you ! 

Similar Product Recommend