Welcome Customer !

Membership

Shenzhen ES AQUA Machinery Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 饮料灌装设备

Xwboo>Products

Shenzhen ES AQUA Machinery Co., Ltd.Free·1YRS

  • E-mail

    Esaqualtd@gmail.com

  • Phone

    0086-755-33149322

  • Address

    Leyu Industrial Zone , Leyu Town , Zhangjiagang City , Jiangsu Province , 215622, China

Contact Now

ES-IM1200TInjection Molding Machine

Model
Nature of the Manufacturer
Other
Product Category
Injection Molding Machine
Place of Origin
City, Province
Overview
ES-IM1200T
Product Details

ES-IM1200T

Horizontal injection molding machine:
1, direct pressure horizontal clamping, horizontal injection.
2, for no insert product batch production.
3, the whole process automatic control, the efficiency
4, high, small, small footprint.
Professional choices injection molding machines, professional choices Dongguan Tak Kwan 
Machinery Factory!
Injection molding machines, horizontal injection molding machine, vertical injection molding 
machine, all-electric injection molding machines, all-electric injection molding machine, energy 
saving injection molding machine, rapid prototyping machines, plastic molding machines,
High-speed precision molding machines, large two-plate injection molding machine!    
Injection molding machines can fasten the molds in either a horizontal or vertical position. 
The majority of machines are horizontally oriented, but vertical machines are used in some 
niche applications such as insert molding, allowing the machine to take advantage of gravity. 
Some vertical machines also don't require the mold to be fastened. There are many ways to 
fasten the tools to the platens, the most common being manual clamps (both halves are 
bolted to the platens); however hydraulic clamps (chocks are used to hold the tool in place) 
and magnetic clamps are also used. The magnetic and hydraulic clamps are used where fast 
tool changes are required.The person designing the mold chooses whether the mold uses a 
cold runner system or a hot runner system to carry the plastic from the injection unit to the 
cavities. A cold runner is a simple channel carved into the mold. The plastic that fills the cold 
runner cools as the part cools and is then ejected with the part as a sprue. A hot runner system 
is more complicated, often using cartridge heaters to keep the plastic in the runners hot as the 
part cools. After the part is ejected, the plastic remaining in a hot runner is injected into the next 
part. 

If you need more detail technical information, please kindly contact our company team. Thank you !

Similar Product Recommend