CS6400D Chlorophyll sensor
CS6400D Chlorophyll Sensor
Principle:
CS6400D Chlorophyll sensor uses the characteristic of chlorophyll A absorption and emission peaks in the spectrum to emit monochrome light of a specific wavelength into water. Chlorophyll A in water absorbs the energy of monochrome light and releases monochrome light of another wavelength. The light intensity emitted by chlorophyll A is proportional to the content of chlorophyll A in water.
Functions:
Based on the fluorescence of the pigments to measurement the target parameters , it can be identified before the impact of algal bloom.
No need for extraction or other treatment, rapid detection, to avoid the impact of shelving water samples;
Digital sensor, strong anti-interference ability, long transmission distance;
Standard digital signal output can be integrated and networked with other devices without controller.
Installation of sensors on site is convenient and fast, realizing plug and play.
Technical parameters:
Measurement range | 0-500 ug/L |
Measurement Accuracy | The signal level of 1ppb rhodamine WT dye is ±5% of the corresponding value |
Pressure range | ≤0.4Mpa |
Calibration | Deviation value calibration,slope Calibration |
Requirements | The distribution of chlorophyll in water is very uneven, so multi-point monitoring is recommended. The turbidity of water is lower than 50NTU. |
Main material | Body:SUS316L + PVC(fresh water),Titanium alloy(marine);O-ring:Fluorine Rubber; Cable:PVC |
Power supply | DC:12VDC |
Storage temperature | -15- 65ºC |
Measuring temperature | 0- 45ºC |
Dimension | Sensor:Dia37mm*L 220mm |
Weight | 0.8KG |
Protective rate | IP68/NEMA6P |
Cable length | Standard:10m,the maximum may be extended to 100m. |