Welcome Customer !

Membership

Shaanxi Aerospace the Great Wall Measurement & Control Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 测量仪器

Xwboo>Products
Product Categories

Shaanxi Aerospace the Great Wall Measurement & Control Co., Ltd.Free·1YRS

  • E-mail

    info@tuoluoyi.com

  • Phone

    86-029-82501390,82501710

  • Address

    Xi'an City, Jinhua North Road, No. 169

Contact Now

Monitor For FNN Series Electronic Compass

Model
Nature of the Manufacturer
Other
Product Category
Gyro
Place of Origin
City, Province
Overview
Monitor For FNN Series Electronic Compass
Product Details

Monitor For FNN Series Electronic Compass

1.Notice of using monitor for Three-Axis Electronic Compass:

(1)Avoid voilent impact, scoring and pressure on the monitor. The inclinometer monitor should be operating within the temperature range between -45 ℃ to +85℃,and be stored within -50℃ to +90℃.

(2)The cable of the monitor is for the inclinometer monitor using only,conneting to other instruments is forbidden.When assembling  and disassembling the aviation electric connector, only screw up or screw off the embossing parts of the aviation electric connector,DO NOT screw any other part,in case  of any damage on the cable.

(3)The power supply voltage range is 9V to 15V.Typical power supply voltage is 12V.

(4)The protection level of the monitor is IP64.


2.Description of function keys:

KEY

function

Set To Zero

Set   the output of the electronic compass to zero according to current plane.

Reset

Reset   the output of the electronic compass to factory defalt.

Swtich

Switch   between display of pitch angle and roll angle.

Frequency

Switch   between different output frequencies.

Calibrate Begin

Start   calibrating.

Calibrate Finish

Finish   calibrating.

Notie:The Calibrate Begin key combined with Calibrate Finish key is used to accomplish calibrating. Firstly,locate the electronic compass any plane and press Calibrate Begin key.Secondly, rotate the electronic compass to 360 degree slowly ,then press Calibrate Finish key to finish calibration.


3.Size:

Outline size:145mm×77mm×25mm.


Download:Monitor For FNN Series Electronic Compass.pdf


显示器.png