Welcome Customer !

Membership

Beijing Silk Road Enterprise Management Services Co.,LTD.
Free Member ·1YRS
,
Other

Main Products: 电子元器件

Xwboo>Products

China QSFP 40G SR4 Multimode 100M MPO Fiber Optic Transceiver

Model
Nature of the Manufacturer
Other
Product Category
Fiber Optic Transceiver
Place of Origin
City, Province
Overview
China QSFP 40G SR4 Multimode 100M MPO Fiber Optic Transceiver
Product Details

QSFP 40G SR4 Multimode 100M MPO Fiber Optic Transceiver

Description
Product Name:40G QSFP TransceiverWavelength:850nm
Distance:100mData Rate:40Gb/s
Interface:Single MPO ConnectorPower Supply:Single +3.3V
Warranty:3 YearsApplication:Ethernet,Fiber Channel,Switch To Switch Interface
High Light:

MPO Fiber Optic Transceiver

,

100M Fiber Optic Transceiver

,

Multimode qsfp optical transceiver

QSFP 40G SR4 Fiber Optic Module , Sfp Transceiver Multimode 100M MPO 850nm
Description

40G QSFP PSM LR4 is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. Itprovides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gb/s operation for an aggregate data rate of 40Gb/s on 10km of single mode fiber.

 

An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP+ module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin connector per MSA requirement.

 

Features

 

  1. 4 channels full-duplex transceiver modules
  2. Transmission data rate up to 10.5Gbps per channel
  3. 4 channels 850nm VCSEL array
  4. 4 channels PIN photo detector array
  5. Low power consumption <1.5W
  6. Hot Pluggable QSFP form factor
  7. Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
  8. Single MPO connector receptacle
  9. Built-in digital diagnostic functions
  10. Operating case temperature 0°C to +70°C
  11. 3.3V power supply voltage
  12. RoHS 6 compliant(lead free)

 

Parameter

Package (Form Factor)QSFP+
Data Rate (typical)10.3 Gbps/CH
Centre Wavelength850nm
Distance100m on OM3 MMF
DiagnosticsDigital Monitor
Transmitter4CH VCSEL Array Laser
Receiver4CH PIN photo detector Array
TX Output Power (dBm)-7.5~+2.5
RX Sensitivity (dBm)-9.5
Low/High Case Temperature0°C~70°C
Voltage Supply (typical)3.3v
ConnectorMTP/MPO 8F MMF Without PI

 

 

Specification
ParameterSymbolMinTypicalMaxUnitNotes
Transmitter
Center WavelengthλC127013101350nm1
RMS Spectral Widthλrms  3.5nm1
Average Launch Power, each lanePAVG-5.5-0.5+2.3dBm 
Optical Modulation Amplitude (OMA)POMA-4.5-0.5+3.5dBm1
Difference in Launch Power between any two lanesPtx,diff  5.0dB 
Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each LaneOMA-TDP-9.7  dBm1
Rise/Fall TimeTr/Tf  50ps 
Extinction RatioER3.5  dB 
Relative Intensity NoiseRin  -128dB/Hz 
Optical Return Loss ToleranceTOL  12dB 
Transmitter ReflectanceRT  -12dB 
Transmitter Eye Mask MarginEMM10  %2
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} {0.25, 0.4, 0.45, 0.25, 0.28, 0.4}  
Average Launch Power OFF Transmitter, each LanePoff  -30dBm 
Receiver
Center WavelengthλC127013101350nm 
Damage ThresholdTHd+3  dBm 
Overload, each laneOVL+1  dBm 
Receiver Sensitivity in OMA, each LaneSEN  -12.5dBm 
Difference in Receive Power between any two Lanes (OMA)Prx,diff  5.0dB 
Signal Loss Assert ThresholdLOSA-30  dBm 
Signal Loss Deassert ThresholdLOSD  -15dBm 
LOS HysteresisLOSH0.5 6dB 
Optical Return LossORL  -12dBm 
Receive Electrical 3 dB upper CutoffFrequency, each LaneFc  12GHz 

Notes:

1. Transmitter wavelength, RMS spectral width and power need to meet the OMA minus TDP specs to guarantee link performance.

2. The eye diagram is tested with 1000 waveform.

 

Applications
  • 40GBASE-SR4 40G Ethernet
  • Datacom/Telecom switch & router connections
  • Data Aggregation and Backplane Applications
  • Proprietary Protocol and Density Applications
  • Infiniband transmission at 4ch SDR, DDR and QDR

Order Information

Part NumberProduct Description
QSFP-SR4850nm, 40G, 150m, 0ºC ~ +70ºC
QSFP-CSR4850nm, 40G, 400m, 0ºC ~ +70ºC
QSFP-LR4

1310nm, 40G, 10km, 0ºC ~ +70ºC

10GQSFP-CA-1M10G, copper with 1M optical cable

 

 

Product Pictures

QSFP 40G SR4 Multimode 100M MPO Fiber Optic Transceiver 0

 
QSFP 40G SR4 Multimode 100M MPO Fiber Optic Transceiver 1
 
Factory Image
QSFP 40G SR4 Multimode 100M MPO Fiber Optic Transceiver 2
 

FAQ

Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for order quantity more than

Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or . It usually takes 3-5 days to arrive. Airline and sea shipping are also optional.

Similar Product Recommend