Welcome Customer !

Membership

Beijing Silk Road Enterprise Management Services Co.,LTD.
Free Member ·1YRS
,
Other

Main Products: 电子元器件

Xwboo>Products

China 40G QSFP 40G LR4 1310NM 10KM LC Sfp Fiber Optic Transceiver

Model
Nature of the Manufacturer
Other
Product Category
Fiber Optic Transceiver
Place of Origin
City, Province
Overview
China 40G QSFP 40G LR4 1310NM 10KM LC Sfp Fiber Optic Transceiver
Product Details

40G QSFP 40G LR4 1310NM 10KM LC Sfp Fiber Optic Transceiver

Description
Product Name:40G QSFP TransceiverWavelength:1310nm
Distance:10KmData Rate:10Gb/s
Interface:Dual LCPower Supply:Single +3.3V
Warranty:3 YearsApplication:Ethernet,Fiber Channel,Switch To Switch Interface
High Light:

Sfp Fiber Optic Transceiver

,

1310NM Fiber Optic Transceiver

,

QSFP Fiber Optic Transceiver

40G QSFP Transceiver QSFP-40G-LR4 1310NM 10KM Fiber Optic Transceiver Module
Description

40G QSFP PSM LR4 is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. Itprovides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gb/s operation for an aggregate data rate of 40Gb/s on 10km of single mode fiber.

 

An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP+ module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin connector per MSA requirement.

 

Features

  1. 4 Parallel lanes design
  2. Up to 11.2Gb/s data rate per channel
  3. Aggregate Bandwidth of up to 44.0G
  4. QSFP+ MSA compliant
  5. Up to 10km transmission on single mode fiber (SMF)
  6. Maximum power consumption 3.5W
  7. Single +3.3V power supply
  8. Operating case temperature: 0 to 70°
  9. RoHS-6 compliant

Parameter

Package (Form Factor)QSFP+
Data Rate (typical)10.3 Gbps/CH
Centre Wavelength1310nm
Distance10km
DiagnosticsDigital Monitor
Transmitter4CH 1310nm DFB Laser
Receiver4CH PIN photo detector Array
TX Output Power (dBm)-5.5~+1.5
RX Sensitivity (dBm)-12.6
Low/High Case Temperature0°C~70°C
Voltage Supply (typical)3.3v
ConnectorMTP/MPO 8-degree SMF Without PIN

 

Specification
ParameterSymbolMinTypicalMaxUnitNotes
Transmitter
Center WavelengthλC127013101350nm1
RMS Spectral Widthλrms  3.5nm1
Average Launch Power, each lanePAVG-5.5-0.5+2.3dBm 
Optical Modulation Amplitude (OMA)POMA-4.5-0.5+3.5dBm1
Difference in Launch Power between any two lanesPtx,diff  5.0dB 
Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each LaneOMA-TDP-9.7  dBm1
Rise/Fall TimeTr/Tf  50ps 
Extinction RatioER3.5  dB 
Relative Intensity NoiseRin  -128dB/Hz 
Optical Return Loss ToleranceTOL  12dB 
Transmitter ReflectanceRT  -12dB 
Transmitter Eye Mask MarginEMM10  %2
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} {0.25, 0.4, 0.45, 0.25, 0.28, 0.4}  
Average Launch Power OFF Transmitter, each LanePoff  -30dBm 
Receiver
Center WavelengthλC127013101350nm 
Damage ThresholdTHd+3  dBm 
Overload, each laneOVL+1  dBm 
Receiver Sensitivity in OMA, each LaneSEN  -12.5dBm 
Difference in Receive Power between any two Lanes (OMA)Prx,diff  5.0dB 
Signal Loss Assert ThresholdLOSA-30  dBm 
Signal Loss Deassert ThresholdLOSD  -15dBm 
LOS HysteresisLOSH0.5 6dB 
Optical Return LossORL  -12dBm 
Receive Electrical 3 dB upper CutoffFrequency, each LaneFc  12GHz 

Notes:

1. Transmitter wavelength, RMS spectral width and power need to meet the OMA minus TDP specs to guarantee link performance.

2. The eye diagram is tested with 1000 waveform.

 

Applications
  • 40G Ethernet
  • Infiniband QDR, DDR and SDR
  • Datacenter and Enterprise networking
Product Pictures
40G QSFP 40G LR4 1310NM 10KM LC Sfp Fiber Optic Transceiver 0
40G QSFP 40G LR4 1310NM 10KM LC Sfp Fiber Optic Transceiver 1
 
Factory Image
40G QSFP 40G LR4 1310NM 10KM LC Sfp Fiber Optic Transceiver 2
 

FAQ

Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for order quantity more than

Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or . It usually takes 3-5 days to arrive. Airline and sea shipping are also optional.

Similar Product Recommend