Welcome Customer !

Membership

Beijing Silk Road Enterprise Management Services Co.,LTD.
Free Member ·1YRS
,
Other

Main Products: 电子元器件

Xwboo>Products

China 10KM DDM QSFP28 100G LR4 Wdm Sfp Module , Sfp Fiber Transceiver

Model
Nature of the Manufacturer
Other
Product Category
Fiber Optic Transceiver
Place of Origin
City, Province
Overview
China 10KM DDM QSFP28 100G LR4 Wdm Sfp Module , Sfp Fiber Transceiver
Product Details

10KM DDM QSFP28 100G LR4 Wdm Sfp Module , Sfp Fiber Transceiver

Description
Product Name:100G QSFP28Data Rate:100Gb/s
Wavelength:1310nmDistance:10Km
Interface:Dual LCPower Supply:Single +3.3V
Warranty:3 YearsApplication:Ethernet,Fiber Channel,Switch To Switch Interface
High Light:

LR4 Wdm Sfp Module

,

DDM Wdm Sfp Module

,

QSFP28 Sfp Fiber Transceiver

100G QSFP28 Optical Fiber Transceiver Duplex Lc 1310NM 10KM DDM 100G-QSFP28-LR4
Description

The 100G QSFP28 LR4 optical receiver integrates receive path onto one module. The receiver four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.

 

Features

Absolute Maximum Ratings

ParameterSymbolMin.Max.UnitNote
Supply VoltageVcc-0.53.6V 
Storage TemperatureTS-4085°C 
Relative HumidityRH085% 
Rx Damage Threshold,per LanePRdmg5.5 dBm 

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

Recommended Operating Conditions

Electrical Characteristics (Top=0~70℃, Vcc=3.14~3.47V)

(Tested under recommended operating conditions,unless otherwise noted)

ParameterSymbolMinTypMaxUnitNotes
Receiver
Signaling rate per laneDRPL25.78125 ± 100 ppmGb/s 
Differential data output swingVout,pp400 800mV 
Eye widthEw0.57  UI 
Vertical eye closure   5.5dB 
Differential output return loss (min)RLd(f)

9.5 – 0.37f, 0.01≤f<8

4.75 – 7.4log10(f/14), 8 ≤f<19

 

dB 

Common to differential mode conver- sion return loss (min)

 

RLdc(f)

22-20(f/25.78), 0.01≤f<12.89

15-6(f/25.78), 12.89≤f<19

 

dB 
Differential termination mismatchTm  10% 
Transition time, 20% to 80%Tr,Tf12  ps 

 

Optical Characteristics (Top=0~70℃, Vcc=3.14~3.47V)

(Tested under recommended operating conditions,unless otherwise noted)

ParameterSymbolUnitMinTypMaxNotes
Receiver
Receive Rate for Each Lane Gb/s25.78125 ±100 ppm1
Four Lane Wavelength Rangeλ1nm1294.531295.561296.59 
λ21299.021300.051301.09 
λ31303.541304.581305.63 
λ41308.091309.141310.19 
Overload Input Optical PowerPmaxdBm5.5   

Average Receive Power for Each

Lane

PindBm-10.6 4.52,4
Receiver Sensitivity(OMA)per lanePsens1dBm  -10.6 
Stressed Sensitivity(OMA) per lanePsens2dBm  -6.83
Return LossRLdB-26   
Receiver Electrical 3dB upper cutoff frequency, per lane GHz  31 
Los De-AssertPddBm  -11.6 
Los AssertPadBm-23.6   
Loss HysteresisPd-PadBm 2  

Notes:

1. Receiver consists of 4 photodetectors operating at 25.78Gb/s each.

2. Minimum value is informative, equals min TxOMA with infinite ER and max channel insertion loss.

3. SRS is measured with vertical eye closure penalty of 1.8 dB max, J2 of 0.30 UI, and J9 of 0.47 UI.

4. Power value and power accuracy are with all channels on..

PinNameLogicDescription 
1GND Ground1
2Tx2nCML-INC10
3Tx2pCML-INC10
4GND Ground1
5Tx4nCML-INC10
6Tx4pCML-INC10
7GND Ground1
8ModSelLLVTTL-IModule Select3
9ResetLLVTTL-IModule Reset4
10Vcc Rx +3.3V Power Supply Receiver2
11SCLLVCMOS-I/O2-wire serial interface clock5
12SDALVCMOS-I/O2-wire serial interface data5
13GND Ground1
14Rx3pCML-OReceiver Non-Inverted Data Output9
15Rx3nCML-OReceiver Inverted Data Output9
16GND Ground1
17Rx1pCML-OReceiver Non-Inverted Data Output9
18Rx1nCML-OReceiver Inverted Data Output9
19GND Ground1
20GND Ground1
21Rx2nCML-OReceiver Inverted Data Output9
22Rx2pCML-OReceiver Non-Inverted Data Output9
23GND Ground1
24Rx4nCML-OReceiver Inverted Data Output9
25Rx4pCML-OReceiver Non-Inverted Data Output9
26GND Ground1
27ModPrsLLVTTL-OModule Present6
28IntLLVTTL-OInterrupt7
29Vcc Tx +3.3V Power supply transmitter2
30Vcc1 +3.3V Power supply2
31LPModeLVTTL-ILow Power Mode8
32GND Ground1
33Tx3pCML-INC10
34Tx3nCML-INC10
35GND Ground1
36Tx1pCML-INC 
37Tx1nCML-INC10
38GND Ground1
 

Standards

Compliant with IEEE 802.3ba

Compliant with QSFP28 MSA hardware specifications

Compliant with RoHS

 

Applications

100GBASE-LR4

Infiniband QDR and DDR interconnects

100G Datacom connections

 

Product Pictures
10KM DDM QSFP28 100G LR4 Wdm Sfp Module , Sfp Fiber Transceiver 0
10KM DDM QSFP28 100G LR4 Wdm Sfp Module , Sfp Fiber Transceiver 1
 
Factory Image
10KM DDM QSFP28 100G LR4 Wdm Sfp Module , Sfp Fiber Transceiver 2
 

FAQ

Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for order quantity more than

Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or . It usually takes 3-5 days to arrive. Airline and sea shipping are also optional.

Similar Product Recommend