Overview
MW03 series lifting electromagnet suction cup for lifting slab
Product Details
USES:
For lifting large ingot, continuous casting plate, thick steel slab, and slab over 6m in length, please use two electromagnets to lift the slab in order to avoid eccentric inclination.
Lifting billet, slab lifting electromagnet MW03 series lifting electromagnet
The hoisting electromagnet is designed for transporting large ingot, continuous casting slab, thick steel plate, etc. It can play an important role in finishing and lifting ingot in steel works.
When lifting steel plates over 6 meters, please use two sets together to avoid inclining. At the same time, as the billet is not easy to bend and deformation, generally also use 2 sets of use
Product name: MW03 series
Lifting electromagnet chuck
Product number: dz-dcxp-002
Detailed introduction:
1. The best magnetic circuit designed according to the characteristics of large magnetic circuit of the whole billet, with small consumption power, light weight, large lifting capacity and safety and reliability.
2. The coil is wrapped with aluminum wire with good heat resistance. The insulation adopts vacuum drying and vacuum pouring, which improves the electrical and mechanical properties of the coil. The heat-resistant grade of the insulation material can reach grade C, so it can be durable in high temperature and harsh working conditions.
Features:
1. The optimal magnetic circuit designed according to the characteristics of high magnetic permeability of the whole billet, with low power consumption, light weight, large lifting capacity and safety and reliability.
2. The coil adopts glass silk covered aluminum wire with good heat resistance. The insulation treatment adopts vacuum dry irrigation, which improves the electrical and mechanical properties of the coil, and the heat resistance grade of the insulation material can reach grade C. Therefore, it can be durable in high temperature and harsh working conditions.