Overview
MC12 (RCDD) series self-discharging electromagnetic iron remover
Product Details
This series of products are self-discharging electromagnetic iron remover with long-term working system. The magnetic field distribution is spherical, and it has continuously running iron unloading belt. Can be constantly adsorbed magnetic objects into the collection box. It is suitable for removing ferromagnetic objects from ore, coke and limestone with thicker layer and larger particle size.
Technical characteristics
1. The magnetic circuit is designed by computer simulation, with large penetration depth, strong magnetic force and high magnetic field gradient to ensure the maximum suction within the working distance.
2. International advanced technology is adopted in the interior to increase the heat dissipation area and reduce the temperature rise of the iron core, thereby reducing the temperature rise of the coil.
3. The iron core is made of high magnetic conductivity material (DT4 electrician pure iron), which greatly improves the magnetic conductivity, significantly reduces the leakage flux of the iron remoter, and greatly enhances the magnetic field strength.
4. The shell of the electromagnetic iron remoter is welded with fully sealed steel plate, and the air tightness test is strictly carried out. The outlet box adopts waterproof protection device. The coil is insulated with grade F, which has excellent insulation performance. Meanwhile, the coil and the shell are fixed with epoxy resin resin, which can withstand high temperature, high humidity and violent collision at the same time. In addition to iron non-magnetic bottom plate to absorb iron by the impact of iron, using non-magnetic rolling manganese plate as the bottom plate, wear resistance, impact resistance, magnetic separation is good.
In order to ensure reliable product quality, rigorous tests were carried out in several key and special processes:
A. welding process:
In the final assembly process of iron eliminator, air tightness test shall be carried out strictly after welding. A pressure test of 0.7mpa shall be used to apply soapy water on all welds without bubbling.
B. winding process:
After the coil wire system, must do the turn insulation test, the ground withstand voltage test.
Insulation test between turns: no short circuit and flashover phenomenon at power frequency voltage of 550V for one minute
Voltage test: no short circuit and flashover phenomenon at power frequency voltage of 2500V for one minute
Therefore, the iron remover produced by our company can work continuously in high temperature, dusty and humid environment.
5. The drum drum with the function of automatic deviation correction can effectively prevent the phenomenon of easy deviation during the rapid operation of the iron strip unloading.
6. Except iron is mostly used in the harsh environment with heavy dust, so the fully sealed bearing seat is specially adopted to effectively prevent dust from entering the bearing and causing harm to it, thus improving the bearing life and the stability of equipment operation.
7. All rubber materials are used to unload the iron belt, and hot vulcanization forming process is adopted between belt baffles and flat belt to make the belt run smoothly, reduce noise and prevent the damage caused by magnetic impurities clamped into the belt.
8. All the supporting control cabinets adopt electrical components from famous domestic and foreign manufacturers, effectively ensuring the stability of its performance. The protection grade of cabinet is IP54. The drive motor is provided with mechanical and electrical protection such as overload, lack of phase and overcurrent, which will not burn out the drive motor even if there is circuit instability or iron fault.
9. Adopt the natural cooling mode, which not only avoids the air cooling type not suitable for dusty environment, but also has the potential oil leakage risk, and there is no additional control of heat transfer and heat conduction equipment, reducing the failure point.
10. Optimized design, low power consumption and low noise.
5. Quality assurance system
The implementation standard of electromagnetic iron remover is JB/T 7689-2006, and the implementation standard of electric control cabinet is xiangq /JB 1458-87. All products of the company from development, design, production, installation to service in strict accordance with the ISO9001 international quality system standards, and obtained ISO9001 international quality system certification.
6. Technical services
After the products arrive at the buyer, our company will send professional technicians to guide the installation, take charge of debugging and track the use of the products regularly. In the process of use, if there is any technical problem, we will give a satisfactory reply within 24 hours after receiving the feedback from the user; If required, arrive within 48 hours.
7. After-sales service commitment
1. Our company implements "three guarantees" of quality, with a shelf life of one year.
2. In case of quality problems of design and manufacture within the warranty period, we will be responsible for free maintenance and replacement of relevant parts.
3. If the product needs the cooperation of the supplier during the installation and use, our company will send relevant personnel to the buyer for on-site service within 48 hours.