The MST30 series provides E1/Ethernet/V.35 electrical to optical conversion of electronic communication and data signals for transmission using fiber optic cable assemblies. The device simultaneously receives incoming optical signals and converts them back to the original electronic signal allowing for full duplex transmission. Together with the fiber optic cables, MST30 provides a rugged, secure, and easy deployable optical link. The device is available in both single mode and multimode configurations, and dual-st......
1. Product Description
The MST30 series provides E1/Ethernet/V.35 electrical to optical conversion of electronic communication and data signals for transmission using fiber optic cable assemblies. The device simultaneously receives incoming optical signals and converts them back to the original electronic signal allowing for full duplex transmission. Together with the fiber optic cables, MST30 provides a rugged, secure, and easy deployable optical link. The device is available in both single mode and multimode configurations, and dual-strand or single-strand optional.
2. Part Number
Part No | Optical | Basic Service | Additional Service | Management | Structure |
MST30A | 1 | 1×E1 (unframed) | 1×RS232 | Console | Mini-desktop |
MST30AV | 1 | 1×V.35 | 1×RS232 | Console | Mini-desktop |
3. Main Features
q Adopt large-scale chips, simple circuit, low power consumption, high-reliability
q The fiber optic modem extends the transmission distance up to 120 km (75 miles).
q Operate over multimode or single mode fiber, optional dual-strand fiber and single-strand fiber.
q Provide one E1 interface, available in 75Ω unbalanced or 120Ω balanced (field selectable).
q Support unframed E1 and framed E1 (fractional) with N×64kbps (N = 1 to 31)
q Provide one or four 10/100BASE-TX Fast Ethernet
q V.35 interface supports 7 types clock mode (DCE & DTE), meet all of requirements of V.35 clock mode.
q The bandwidth of V.35 interface is N×64kbps (N = 1 to 31).
q The clock mode, phase and time-slot selection of V.35 Interface can be configured by network management software and DIP-switches.
q Support local and remote loopback.
q Provide built-in BERT
q Provide additional one RS232 asynchronous data interface.
q Provide comprehensive LED indicators.
q Provide DIP switch for maintenance purpose.
q Provide Console management port.
q The device can be managed with EMS, user friendly application with GUI, Windows based.
q Optional -48VDC or 220VAC power supply.
The KMST30 card series is hot-swappable, can be plugged in any slot of CHAS02.
4. Power Supply and Dimension
Item | Specification |
DC Power Supply | -48V DC with range: -36V ~ -72V |
AC Power Supply | 220VAC±20%, 50HZ |
Power Consumption | ≤10W |
Dimension (W×D×H) | 200×145×45 mm (mini-desktop) |
5. Equipment Interfaces
5.1 Optical Interface
· Number of ports: 1
· Transmission optical power: -3dBm ~ -8dBm
· Receiver sensitivity: -33dBm ~ -40dBm
· Fiber interface: dual SC/dual FC/single SC
· Applicable fiber: single-mode, multi-mode
5.2 E1 Interface
· Standard: ITU-T G.703
· Line Code: HDB3
· Line Rate: Unframed 2048kbps ± 50ppm
Framed N×64kbit/s (N = 1 to 31)
· Line Impedance: 75Ω unbalanced or 120Ω balanced optional
· Electrical Characteristic: comply with ITU-T G.703 recommendation
· Jitter Performance: comply with ITU-T G.823 recommendation
· Electrical Level: ±2.37V±10% or ±3.00V±10%
· Connector: BNC or RJ45 (field selectable)
5.3 Ethernet Interface
· Interface: 10/100BASE-TX
· Interface protocol: compliant with IEEE 802.3
· Data rate: 10/100Mbps auto-negotiation or force mode
· Duplex mode: full duplex, half duplex
· Interface line sequence: MDI/MDI-X auto-sense
· Frame size: regular (1536 or 1552 bytes)
· Connector: RJ-45 electrical interface
· Range 100 meters/328 feet on UTP category 5 cable
1
2
2.1
2.2
2.3
5.4 V.35 Interface
· Number of ports: 1
· Interface protocol: compliant with ITU-T V.35
· Bit Rate: 2.048Mbps or N×64kbps (N = 1 to 31)
· No flow control, transparent transmission
· Work mode: DCE or DTE optional
· Connector: DB25 female
1
2
2.1
2.2
2.3
2.4
5.5 RS232 Interface
· Number of ports: 1
· RS232 asynchronous data interface
· Baud rate: 19200bps
· Connector: RJ45
5.6 Console Management Interface
2.4.1
· Interface: RS-232 serial port
· Baud rate: 57600bps
Connector: RJ-45
6. Application