Welcome Customer !

Membership

Easy Broadband Technology (Beijing) Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 光端机

Xwboo>Products

SVPE40D

Model
Nature of the Manufacturer
Other
Product Category
HDLC Protocol Converter
Place of Origin
City, Province
Overview
The SVPE20/SVPE40 series Interface Converter is an Ethernet extension device utilizing TDM telecom infrastructure (the telecom network of E1/PDH/SDH carrying E1). It converts the Ethernet data into framed/unframed E1 format for transmission over the existing TDM (E1) links and then re-converts the E1 back into Ethernet data at far-end terminal, to bridge two Ethernet LANs over the existing E1-based telecom network. The device can effectively utilize the redundant bandwidth of telecom operators’ existing TDM network......
Product Details

1. Product Description

The SVPE20/SVPE40 series Interface Converter is an Ethernet extension device utilizing TDM telecom infrastructure (the telecom network of E1/PDH/SDH carrying E1). It converts the Ethernet data into framed/unframed E1 format for transmission over the existing TDM (E1) links and then re-converts the E1 back into Ethernet data at far-end terminal, to bridge two Ethernet LANs over the existing E1-based telecom network. The device can effectively utilize the redundant bandwidth of telecom operators’ existing TDM network to transport Ethernet data with low investment.

2. Part Number

Part No

E1 Interface

Service Interface

10/100BASE-TX

Management Interface

Structure

SVPE20D

2

4

Console

Mini-desktop

SVPE40D

4

4

Console

Mini-desktop

3. Main Features

§ Self-developed ASIC, high performance and reliability, low power consumption

§ Able to convert 10/100BASE-TX Ethernet to multiple E1-bundling based on HDLC protocol

§ SVPE20D provides 2×E1 with 75ohm unbalanced interface(field selectable)

§ SVPE40D provides 4×E1 with 120ohm balanced or 75ohm unbalanced interface(field selectable)

§ Support E1 line loopback detection, alarm prompt and close Ethernet interface, to protect downstream service

§ Provide one or four 10/100BASE-TX Fast Ethernet

§ Support transparent transmission of VLAN Ethernet frames

§ Support 802.1p Class of Services and 802.3x flow control function

§ Provides a serial management interface

Optional AC or DC power supply, -48V DC or 220V AC

4. Power Supply and Dimension

DC Power Supply

-48V DC with range: -36V ~ -72V

Power Supply Ripple

≤240mVp-p

AC Power Supply

220V AC ± 20%, 50Hz

Power Consumption

≤5W

Dimension (W×D×H)

200×145×45 mm (mini-desktop)

5. Equipment Interfaces

5.1 E1 Interface

· Standard: ITU-T G.703

· Line Code: HDB3

· Line rate: 2.048Mbps

· Line Impedance: 75Ω unbalanced or 120Ω balanced optional

· Electrical Characteristic: comply with ITU-T G.703 recommendation

· Jitter Performance: comply with ITU-T G.823 recommendation

· Electrical Level: ±2.37V±10% or ±3.00V±10%

· Connector: BNC (75Ω unbalanced) or RJ-45 (120Ω balanced)

5.2 10/100BASE-TX Fast Ethernet Interface

· Interface: 10/100BASE-TX

· Interface protocol: compliant with IEEE 802.3, IEEE 802.3x

· Data rate: 10/100Mbps auto-negotiation or force mode

· Duplex mode: full duplex, half duplex

· Interface line sequence: MDI/MDI-X auto-sense

· Range 100 meters/328 feet on UTP category 5 cable

· Connector: RJ-45 electrical interface

1

2

2.1

2.2

5.3 Console Management Interface

1.1.1

· Interface: RS-232 serial port

· Baud rate: 57600bps

· Connector: RJ-45

6. Application

The equipment may be used for the following purposes:

1) Bridging Ethernet LANs over existing TDM (E1) telecom network.

2) Extending Ethernet networks utilizing TDM (E1) landline based telecom infrastructure.

3) Using telecom network of E1s/PDH/SDH microwave etc. carrying E1s to transport Ethernet data.

In all cases the equipment should be always installed and used in pairs, with one terminal being installed at both end of the network. Below are sample typical applications using SVPE20 series in SDH transmission network.

Similar Product Recommend