4K HDMI Extender By CAT

NegotiableUpdate on February 21

Model

Nature of the Manufacturer: Other

Product Category: HDMI Extender

Place of Origin: City, Province

Online Consult Contact Information

Overview

SPECIFICATIONS: Model No.HDEX0026M1Model name4K HDMI Extender By CATHDMI resolution480P/720P/1080P/4K@24Hz/4K@30Hz Supports 3D etc.HDMI Audio formatAC-3/DTS/DTS-HD/PCMHDMI Max bandwidth300MHz MaxHDMI Max baud rate9Gbps MaxNetwork cable interfaceStandard IEEE-568B wiring methodTransmissiondistance≤70m (Cat 6e) If need more longer distance, please use the cascade link.IR Carrier frequency30~50KHzPOC featuressupportOutput HDMI cable distance2160P/AWG 26 ≤3m 1080P/AWG 26 ≤8mPower adapterspecificationAC 100~240V/D......

Product Details

Note: to follow above connecting diagram shows, you can connect HD Signal source→HDMI Extender Transmitter→HDMI Extender Receiver→Display→IR Transmitter→IR Receiver-Power

1. Connect the HDMI IN Port of the TX to the HDMI output port of

signal source/PC over a HDMI cable.

2.Connect the HDMI OUT Port of the RX to the HDMI input port of

display device over a HDMI cable.

3. To use one Ethernet cable to connect the CAT Output port of TX with the CAT IN Port of RX, Ethernet cable max supports to 70M. You can do cascade link by using Ethernet cable to connect the CAT Out port of the RX with the CAT IN Port of the next level RX.

4.To connect the power adaptor to the TX or RX for supply the power.

5. IR Transmitter and Receiver to connect to matched IR-IN/IR-OUT port.

IR Extend

1. IR Extend is used for using IR remote to do distance control to

the peripheral device.

2. To check if the working frequency of the IR remote is under the

range of the 30-50HZ.

3. To point the IR Transmitter head at the peripheral device location.

4. At One to Many mode, the IR can be only used for the first level TX and RX data transmission rather than the latter level.