Welcome Customer !

Membership

Nanjing Yuanxin Automation Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 焊切设备

Xwboo>Products

Nanjing Yuanxin Automation Technology Co., Ltd.Free·1YRS

  • E-mail

    yxautomatization@yeah.net,

  • Phone

    0086-25-52760821

  • Address

    Jiangning Economic and Technical Development Zone Area Street, Nanjing, Jiangsu

Contact Now

1025LE3 Welding Oscillator / Welding Torch Oscillator / Welding Weaver

Model
Nature of the Manufacturer
Other
Product Category
Welding Oscillator, 1025 Serie
Place of Origin
City, Province
Overview
1025LE3 Welding Oscillator / Welding Torch Oscillator / Welding Weaver
Product Details
YXAWO-1025LE3 Linear Welding Oscillator
◆ Brief Introduction
Welding oscillator is to increase the width of the welding seam formed through one time welding, is mainly used for a relatively wide welding seam, for example, V-groove welds, fillet welds. When we weld a relatively wide seam, if the welding torch does not swing, the width of formed seam is relatively narrow. To solve this problem, we need to make the welding torch swing back and forth in the width direction along the seam.
Welding oscillator consists of two main parts, mechanical swing mechanism (we called slide) and electrical control part (we called controller).
Welding oscillator produced by our company has a high-quality controller and uses the speed & position double closed-loop DC-Servo control technology, to ensure oscillating accuracy and speed will not be affected by the load changes. Due to the oscillating speed and amplitude can be adjusted at any time, so it is easy to achieve the requirements of different weld width and oscillating speed; greatly reduce the labor intensity of the welder; ensure the welding quality and improve the welding efficiency.
Standard Configuration
Operation Panel
◆ Main Functions and Features
● Oscillating parameters are input by digital knob and displayed in digital
, and visualized
to use.
● With a parameters memory and power-off protection function, ensure the parameters not
lost in a sudden power off.
● With parameters restore memory function, parameters can be automatically recovered to
the before powering status, when the power is on.
● Use the speed & position double closed-loop DC-Servo control technology, to ensure
oscillating accuracy and speed will not be affected by the load changes.
● Motor over-current and over-voltage dual protection function to protect the motor
performance and extend service life.
● Electronic controls oscillating speed, amplitude, center, left/right dwell, to make
operations simple and convenient.
● While oscillator stopping, return to the center automatically.
● Wide input power supply voltage range is suitable for using around the world.
◆ Technical Parameters
Oscillating Parameters Input Mode
Digital, Knob Adjustment, LED display
Rated Load
25Kg (Horizontal Oscillating)
Slide Stroke
100mm
Maximum Oscillating Speed
4000mm/min
Maximum Oscillating Frequency
150times/min
Oscillating Amplitude
2-90mm
Centering Range10-90mm
Oscillating Accuracy
±0.3mm
Left / Right Dwell Time
0-3s
The Welding Methods to Be Applied
TIG, MIG, MAG, Plasma Welding
Control Methods
Speed & Position Double Closed-Loop DC-Servo Control
Slide Structure
Motor + Guide + Encoder
Input Power Supply
AC100-240V Single-phase, 50/60Hz, 2A
Outline Dimension
Controller 240×160×120mm, Slide 268×169×63.5mm
Mounting Hole Size
Controller 170 × 120mm ,4-M4; Slide 64×82mm, 4-M6
Weight
Controller 2.65Kg, Slide 4.5Kg
Standard Configuration
Controller, Slide, Connecting Cables (including Power Cable and Slide Cable).
User Options
Welding Torch Holder, Communication Interface for Remote Control
In addition, our company can also supply special welding oscillator in accordance with the needs of users.