AB part Glue dispenser Machine PGB-700

NegotiableUpdate on October 18

Model: PGB-700

Nature of the Manufacturer: Other

Product Category: Glue Dispenser Machine

Place of Origin: City, Province

Online Consult Contact Information

Overview

AB part Glue dispenser Machine PGB-700

Product Details

Features:

1. Automatic metering and mixing, touch screen PLC control system, English operation interface allow easy to set parameters;
2. Big LCD screen displays various processing data;
3. Easy programming of dots, stripes, arcs, compound arcs and patterns on different planes;
4. Gluing speed and timing can be set;
5. CAD file can be imported and turned to be dispensing patterns, and downloaded via USB; (optional function)
6. Mixing ratio 1:1-1:10 and gluing volume can be set and adjusted as per actual need. Dynamic mixing ensure two component glue to be mixed to a fully homogeneous consistency;
7. Metering, mixing and gluing simultaneously;
8. Two tanks keep A glue and B glue separately;
9. Liquid level sensor, alarm function;
10. Tank stirring and vacuum defoaming function optional;
11. Auto cleaning; The cleaning mode can be manually or automatically, manual mode just remove the mixing tube then soak into cleaning agent, after 10 min take out and clean with compressed air, Automatic mode only need to operate the cleaning switch on touch screen within 1 minute to complete;
12. Glue tank/metering pump/glue pipe heating function (optional);
13. Vacuum control keeps thin fluids from dripping;
14. Unique control system which will not influenced by air pressure factor, ensures optimal dispensing performance;
15. XYZ axis can be programmed to dispense glue along desired patterns.

Application Area:

1. Electrical Products: Electronic parts, integrated circuits, circuit board solder paste, fixed and dust and moisture protection, LCD liquid crystal screen, speakers, headphone, audio, LED, optical lens, SMD transformers, relays.
2. Communication Products: Keypad, phone casing bonding, radio, telephone, Computers, MP4, electronic toys, chassis bonding, switches, connectors, plug cable.

Advantage of dispenser robot
Dispensing robots automate most fluid assembly processes ensuring fast and repeatable deposits without mess, waste or error. For making repeat dots, beads, arcs and circles with any fluid, adhesive or paste. Easy to setup and run and these systems are supplied complete.

i.Specification:

Model No:	PGB-700
Mixing Ratio	100:100-10:100(1:1-1:10) Adjustable
Metering precision	±1%
Outflow speed	1g/sec-15g/sec
Mixing precision	±1%
Mixing mode	Dynamic mixing /Static mixing
Glue Viscosity	Lower than 20000 CPS(mPa·s)
Control mode	PLC + Touch Screen
Control system	Independent R&D
Measuring mode	Stepping motor/High-precision, wear-resistant, long-life Gear pump
Working voltage	AC 220V 50Hz/60Hz
Power requirement	3.55KW
Air pressure requirement	4.5-8KG
Machine Dimension	1500(L)1200(W)1500(H)mm
Weight	approx 260 KG
Work environment	Humidity: 20%~98%RH; Temperature: 0~+40°c

Suitable Material: For waterproof, adhesive, fixed two-component adhesive.

Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU), etc.

Applications:LED products ,Crafts,Electronic components

Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor, Photovoltaic module, Photovoltaic inverter .etc

Liquid A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine, draining out liquids individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.

Glue dispenser machine

Introduction ：

1. Working Area: 700x700x80mm
2.Application products: LED display modules
3.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
4. Double Cylinder plunger pump: No glue backflow, high speed, glue continuously, long life time.
5. Mix glue A & B more evenly; no more or no less for agent B.

Name: Fully Automatic Glue Dispensing Machine
Model: PGB-700
Advised Glue: two-component silicone, epoxy, PU, etc.
Ratio: 1:1 to 10:1 adjustable
Glue Color: colored
Glue Type: includes high percentage of additives, abrasive
Customer’s Products: LED Screen ( display)

Machine Type: fully automatic & regular modle

Ratio between the base agent and hardener: 1:1 or 10:1
Abrasive. The base agent includes percentage of additives and fillings such as aluminum oxide, or silica powder, in order to increase the hardness or heat conduction
The mixed liquid is abrasive, cause big friction to the pump.
Need to vacuum to remove the air bubble inside
Not easy to mix the two components evenly.
Vacuum: to remove the air bubble inside the adhesive;
Self-cleaning；
Heating: pre-heat the resin before used
Dynamic Mixing Method to mix evenly;
Daheng Patent Metering Pump: anti-abrasive, long life span; high precision;
Multi-nozzle: to improve capacity.
High Precision Valve;
Quality & Strict position control system.
Multi-head nozzle available.