，-
E-mail
sales@dahengkongjiao.com
- Phone
-
Address
Building2,No.6 Hongyuan Road,Economic And Technical Development Zone(East Zone),Guangzhou,China
Product Categories
- Vacuum glue potting machine
- CCD Visual glue dispensing machine
- Production line conveying glue dispenser
- customized glue machine
- Table top glue dispenser
- Automatic glue dispenser
- Semi automatic gluing machine
- Automatic glue dispensing machine
- Glue Dispenser Machine
- Glue Mixing Machine
- Glue Potting Machine
Guangzhou Daheng Automation Equipment Co.,LtdFree·1YRS
AB part Glue dispenser Machine PGB-1200
NegotiableUpdate on October 18
- Model
- PGB-1200
- Nature of the Manufacturer
- Other
- Product Category
- Glue Dispenser Machine
- Place of Origin
- City, Province
Overview
AB part Glue dispenser Machine PGB-1200
Product Details
| Model No: | PGB-1200 |
| Working area | 1200x1200x100mm |
| Mixing Ratio | 100:100-10:100(1:1-1:10) Adjustable |
| Metering precision | ±1% |
| Outflow speed | 1g/sec-12g/sec |
| Mixing precision | ±1% |
| Mixing mode | Dynamic mixing /Static mixing |
| Glue Viscosity | Lower than 35000 CPS (mPa·s) |
| Control mode | PLC + Touch Screen |
| Control system | Independent R&D |
| Measuring mode | Stepping motor/High-precision, wear-resistant, long-life Gear pump |
| Working voltage | AC 220V 50Hz/60Hz |
| Power requirement | 3.55KW |
| Machine Dimension | 1960(L)*1550(W)*1327(H)mm |
| Weight | 500 KG Roughly |
| Work environment | Humidity: 20%~98%RH; Temperature: 0~+40°c |
Application of filler glue potting:
1.LED products: LED display , led screen , outdoor wall washer , outdoor rigid light , underground lamp , underwater light .
2.Electronics parts : Micro-electronics, inductors, transformers, ballasts, electronic coils, transformers, relays, loudspeakers, heat kettles, inductors and so on .
3. Electric vehicle: auto lamp ,generator, clutch, air conditioner filter, oil filter, car control card, horn, flasher , electric vehicle accessories.
4.Communications parts : Communication box
5.Water treatment: Water filter , water meter and so on .
Other products need glue potting process .
Application of crystal glue:
- Surface gluing ：flexible strips Photo albums, Mosaic tiles, stickers, badges, refrigerator stickers, bra buttons, insoles, snowboard, tile stickers and other crafts.
- Crystal glue potting for isolation: LED resin word, small module, underwater lamp, vase , digital tube and other products that need to potting for isolation .
Machine functions :
- Our machine can be use for AB glue ratio between the base agent and hardener: 1:1
- The double cylinder plunger pumps is designed for high abrasive glue materials.
- Machine have vacuum functions that can remove the air bubble inside
- AB tanks have stirrer to make sure AB glue not have sediment.
- The mixed liquid is abrasive, cause big friction to the pump.
- Need to vacuum to remove the air bubble inside
- Not easy to mix the two components evenly.
- Vacuum: to remove the air bubble inside the adhesive;
- Self-cleaning；
- Heating: pre-heat the resin before used
- Dynamic Mixing Method to mix evenly;
- Daheng Patent Metering Pump: anti-abrasive, long life span; high precision;Multi-nozzle: to improve capacity.
- High Precision Valve;
- Quality & Strict position control system.
- Multi-head nozzle available.
Liquid A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine, draining out liquids individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
Advantage of automatic glue dispensing machine:
1. Fully automatic operation, accurate proportion and even mixing
2. Glue dosing while mixing, no waste of glue and no waste of consumables. Precise dosing and dispensing.
3. The glue amount of the product is consistent and good. The edge of the machine is clean without glue.
4. Machine glue dosing save much time and effective and lower cost
5. There is no need for glue pouring staff, only one operator is needed to complete the mass production
Normally technical issues should be solved to choose the glue potting machine
1. Ratio between the base agent and hardener: 1:1 or 10:1
2. Fillers：Abrasive the base agent includes percentage of additives and fillings such as aluminum oxide, or silica powder, in order to increase the hardness or heat conduction
3. The mixed liquid is abrasive, cause big friction to the pump.
4. Need to vacuum to remove the air bubble inside
5. Not easy to mix the two components evenly.
6. Vacuum: to remove the air bubble inside the adhesive;
7. Self-cleaning；
8. Heating: pre-heat the resin before used
9. Dynamic Mixing Method to mix evenly;
10. Daheng Patent Metering Pump: anti-abrasive, long life span; high precision;Multi-nozzle: to improve capacity.
11. High Precision Valve;
12. Quality & Strict position control system.
13. Multi-head nozzle available.
Similar Product Recommend
