AB components glue dispensing machine PGB-700

NegotiableUpdate on October 18

Model: PG700

Nature of the Manufacturer: Other

Product Category: Glue Dispenser Machine

Place of Origin: City, Province

Online Consult Contact Information

Overview

AB components glue dispensing machine PGB-700

Product Details

Model No:	PGB-700
Working area	700x700x100mm
Mixing Ratio	100:100-10:100(1:1-1:10) Adjustable
Metering precision	±1%
Outflow speed	1g/sec-12g/sec
Mixing precision	±1%
Mixing mode	Dynamic mixing /Static mixing
Glue Viscosity	Lower than 35000 CPS (mPa·s)
Control mode	PLC + Touch Screen
Control system	Independent R&D
Measuring mode	Stepping motor/High-precision, wear-resistant, long-life Gear pump
Working voltage	AC 220V 50Hz/60Hz
Power requirement	3.55KW
Machine Dimension	1475(L)1100(W)1328(H)mm
Weight	460 KG Roughly
Work environment	Humidity: 20%~98%RH; Temperature: 0~+40°c

Suitable Glue material:

AB crystal glue: Glue dropping application and potting application.

AB glue potting for isolation (with fillers): Two components silicone , two parts of PU, AB glue epoxy and so on .

Applications:

Application of crystal glue:

1. Surface gluing ：flexible strips Photo albums, Mosaic tiles, stickers, badges, refrigerator stickers, bra buttons, insoles, snowboard, tile stickers and other crafts.

2. Crystal glue potting for isolation: LED resin word, small module, underwater lamp, vase , digital tube and other products that need to potting for isolation .

Application of filler glue potting:

1.LED products: LED display , led screen , outdoor wall washer , outdoor rigid light , underground lamp , underwater light .

2.Electronics parts : Micro-electronics, inductors, transformers, ballasts, electronic coils, transformers, relays, loudspeakers, heat kettles, inductors and so on .

3. Electric vehicle: auto lamp ,generator, clutch, air conditioner filter, oil filter, car control card, horn, flasher , electric vehicle accessories.

4.Communications parts : Communication box

5.Water treatment: Water filter , water meter and so on .

Other products need glue potting process .

Machine functions :

1. Our machine can be use for AB glue ratio between the base agent and hardener: 1:1
2.The double cylinder plunger pumps is designed for high abrasive glue materials.
3.Machine have vacuum functions that can remove the air bubble inside
4.AB tanks have stirrer to make sure AB glue not have sediment.
5.The mixed liquid is abrasive, cause big friction to the pump.
6.Need to vacuum to remove the air bubble inside
7.Not easy to mix the two components evenly.
8.Vacuum: to remove the air bubble inside the adhesive;
9.Self-Cleanning
10.Heating: pre-heat the resin before used
11.Dynamic Mixing Method to mix evenly;
12.Daheng Patent Metering Pump: anti-abrasive, long life span; high precision;
13.Multi-nozzle: to improve capacity.
14.High Precision Valve;
15.Quality & Strict position control system.
16.Multi-head nozzle available.

Liquid A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine, draining out liquids individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.

Advantage of automatic glue dispensing machine:

1. Fully automatic operation, accurate proportion and even mixing

2. Glue dosing while mixing, no waste of glue and no waste of consumables. Precise dosing and dispensing.

3. The glue amount of the product is consistent and good. The edge of the machine is clean without glue.

4. Machine glue dosing save much time and effective and lower cost

5. There is no need for glue pouring staff, only one operator is needed to complete the mass production

Normally technical issues should be solved to choose the glue potting machine

1. Ratio between the base agent and hardener: 1:1 or 10:1

2. Fillers：Abrasive the base agent includes percentage of additives and fillings such as aluminum oxide, or silica powder, in order to increase the hardness or heat conduction

3. The mixed liquid is abrasive, cause big friction to the pump.

4. Need to vacuum to remove the air bubble inside

5. Not easy to mix the two components evenly.

6. Vacuum: to remove the air bubble inside the adhesive;

7. Self-cleaning；

8. Heating: pre-heat the resin before used

9. Dynamic Mixing Method to mix evenly;

10. Daheng Patent Metering Pump: anti-abrasive, long life span; high precision;Multi-nozzle: to improve capacity.

11. High Precision Valve;

12. Quality & Strict position control system.

13. Multi-head nozzle available.