Welcome Customer !

Membership

Zhengzhou Yunda Paper Machinery Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 造纸设备

Xwboo>Products

Zhengzhou Yunda Paper Machinery Co., Ltd.Free·1YRS

  • E-mail

    info@zzyunda.com,info@zzyunda.com

  • Phone

    +86-371-62581860,+86-0371-62586186

  • Address

    168 SHIJI AVE., XUEDIAN, XINZHENG, HENAN, CHINA

Contact Now

Ragger, Rope Cutter, Grapple

Model
Nature of the Manufacturer
Other
Product Category
Pulper and Auxiliary Equipment
Place of Origin
City, Province
Overview
Ragger is used for coarse screening and cleaning and match with hydrapulper, make contaminants in waste paper such as wires, strings, plastics, yarns and alike twine continuously during the running of hydrapulper, forming a rope and pulled out and discharged. Thus the furnish is preliminarily cleaned. The machine has advantage of higher work efficiency, lower energy consumption, simple structure and easy to operate and maintain, etc.Grapples are used in continuouspulping system with lifting equipment to take he......
Product Details

Advantage

  • Ragger and Rope Cutter are used together with pulper, to drag the rope out of pulper and cut off for easy transportation.
  • Long moving route of cutter to avoid rope block and plug.
  • Designed with double hydraulic cylinders to ensure enough cutting force.

Structure and Principle

Ragger:

Ragger is made up of rack, motor, reducer, pressing wheel, landing gear, reel and guide wheel, etc. The motor drives the reel via reducer. The reel runs slowly and pulls out ropy impurities. The running speed and direction of twined rope is adjustable accordingly. The twined rope is compacted by compressing wheel and the pressure is also adjustable by landing gear. Guide wheel supports the twin rope and reduce its running resistance. The ragger structure is simple and compact.

Grapple:

Grapples are made of four tines, air cylinder, connecting rod, lifting ring base, pin roll, cylinder set casing, hinge and so on. Auxiliary attachment: pneumatic triad, two-position four-way magenetic exchange valve, air supply and so on. Cleaned air and atomized oil in the triad enter the cylinder then the piston rod drives the tines by articulated mechanism. Close the tines to grab and open to load.

Cutter:

Components: rope cutter comprises frame, blade, hydraulic cylinder, hydraulic pump station and control parts. The frame is mainly used to fix hydraulic cylinder, blade and blade table, and as the directive slide track for blade. Blade and blade table are the main parts to cut off rope. Raw material of blade and table is alloy tool steel with high hardness, toughness and abrasive resistance. The function of hydraulic pump station supplies power (hydraulic energy) of rope cutter. Control part is used to control the operation of rope cutter.

Technical Data

Technical Data of Ragger

ModelJSJ600
Roping Speed (m/h)0-60
Motor Power (KW)4
Outline Dimension (L*W*H) (mm)1900*1700*1700

Technical Data of Rope Cutter

ModelQS35
Working Pressure (MPa)25
Hydraulic Pressure (T)2*50
Cutter Route (mm)850
Pump Station Motor Power (KW)11
Oil Tank Volume (L)180
Equipment Weight (Kg)1650

Technical Data of Grapple

ModelZD1 (4 TINES)ZD2 (2 TINES)ZD3 (4 TINES)
Rated Load Lifting Capacity (Kg)100015002000
Load Capacity (Kg)3008001300
Bucket Capacity (m3)0.050.40.2
Outline Dimension (mm)When ClosedΦ700*1410H940*1050*1910Φ1120*1950H
When OpenedΦ1050*1350H1580*1050*1940Φ1560*2114H
Rated Air Pressure (MPa)0.60.60.6
Air Cylinder Tension (Kg)180018002200
Working Temperature (℃)-15-50-15-50-15-50
Similar Product Recommend