-
E-mail
sales@qiangliled.com
- Phone
-
Address
No.8065, E6, West Xiang’an Road, Xiang’an High-tech Torch Zone, Xiamen, China
Membership
Help
Xiamen Qiangli Jucai Opto-electronic Technoloy Co., Ltd.Free·1YRS
sales@qiangliled.com
No.8065, E6, West Xiang’an Road, Xiang’an High-tech Torch Zone, Xiamen, China
1.Indoor S1.6 module is fine pixel LED module, so we suggest to go with 640*480mm MG cabinet, cabinet model is QM-Pro-1.
2.Indoor S1.6 uses HUB320, and there is only input port, not output port.
3.S series LED module use gold wire LED lamp and high refresh rate IC.
4.Temperature requirement:
5.Humidity requirement:
6.Keep away from water: Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
7.Electro-static protection: The worker must wear an anti-electrostatic wrist strap and anti- electrostatic glove. Various tools must be strictly grounded during assembly.
8.humidity is higher than 65%RH or wet weather, the use of the environment for dehumidification treatment, and it is recommended that the normal use of more than 8H every day, and close the relevant doors and Windows at night, to prevent the display screen damp caused bad.
9.in the process of use and transportation, do not fall, push, squeeze, pressure unit plate, in order to avoid damage to the display screen

S1.6, Broadcasting Center, 43sqm