Welcome Customer !

Membership

Xiamen Qiangli Jucai Opto-electronic Technoloy Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: LED显示屏

Xwboo>Products

Xiamen Qiangli Jucai Opto-electronic Technoloy Co., Ltd.Free·1YRS

  • E-mail

    sales@qiangliled.com

  • Phone

  • Address

    No.8065, E6, West Xiang’an Road, Xiang’an High-tech Torch Zone, Xiamen, China

Contact Now

Indoor P3.0 Gold Wire High Refresh Rate LED Display Module

Model
Nature of the Manufacturer
Other
Product Category
S
Place of Origin
City, Province
Overview
Main SpecificationPixel Pitch: 3.0 mmModule Size: 320*160 mmResolution: 104*52 dotsLED: SMD2020(gold wire)Brightness: ≥700 nitsMax Current: ≤4.7 APixel Density: 105625 dots/㎡Refresh Rate: ≥3840 HzPort: HUB75E
Product Details

Remarks & Key Precautions

1.Indoor S3.0 can go with 640*480mm MG cabinet, suggestion cabinet model is QM-Pro-2.
2.Indoor S3.0 uses HUB75E.
3.S series LED module use gold wire LED lamp and high refresh rate IC.
4.Temperature requirement:

  • Storage temperature range: -10℃-30℃, over 30℃ needs to do cooling treatment. Lamp surface temperature(working period): ≤60℃, temperature control equipment is required to be installed when temperature exceeding the standard.

5.Humidity requirement:

  • Storage humidity range: 10% RH-60% RH, humidity over 60% RH requires dehumidification treatment.

6.Keep away from water: Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
7.In connection with power supply, it is necessary to ensure tightening of terminal joint screw to prevent joint position from loosening, resulting in wire burning or product damage caused by high contact resistance. Torque of M4 screw is 6.0-8.0 Kgf.cm, and that of M3 screw is 4.0-6.0 Kgf.cm.
8.If there is any dripping on the drip position of the product that needs to be cleaned with alcohol to prevent the product from being damaged due to liquid corrosion;
9. the installation structure used in the screen must be properly grounded to prevent dangerous accidents such as leakage of the screen or electric shock due to grounding errors.

Application

Application

S3.0, Company Showroom, 61sqm