The self-developed full-stroke pneumatic chuck can complete intelligent cutting without manual adjustment. The bus control system is equipped with the functions of integrated control and three-chuck pulling cutting, which makes the cutting speed faster and more stable.
Product Advantage:
1.The laser beam is relatively thin, the material loss is small, the utilization rate of the elbow is improved, and save cost
2. Servo motor can control the accuracy of the division angle to an error of about 0.1%.
3. Nitrogen, oxygen, and compressed air can be selected as cutting gas for different materials, and the cutting surface has a high smoothness.
4. Segmented cutting of elbows with different angles: unlimited number and angle segmental cutting can be performed on the same elbow





Product Advantage:
1.The laser beam is relatively thin, the material loss is small, the utilization rate of the elbow is improved, and save cost
2. Servo motor can control the accuracy of the division angle to an error of about 0.1%.
3. Nitrogen, oxygen, and compressed air can be selected as cutting gas for different materials, and the cutting surface has a high smoothness.
4. Segmented cutting of elbows with different angles: unlimited number and angle segmental cutting can be performed on the same elbow





| Project name | Parameter | Unit |
Raw material length | 4000~6000 | mm |
| Maximum cut pipe length (cutting length) | 0~6000 | mm |
| Cut pipe diameter | 16~350 (Workpiece circumscribed circle) | mm |
| Minimum tailings | ≥0 (related to the length of the workpiece and the actual cutting situation) | mm |
| X, Y axis positioning accuracy | ±0.05/1000mm | mm |
| X, Y axis repeated positioning accuracy | ±0.03/1000mm | mm |
| Working acceleration | 0.8G | m/s² |
| maximum operating speed | 60
| m/min |
| chuck weight | 400 | Kg |
| Chuck rated speed | 80 | rpm |
| Installed weight | about 18000 | Kg |
| Mainframe shape (length, width and height) | About 17000×5500×2600 | mm |