Welcome Customer !

Membership

Mintec Laser (Beijing/Tianjin)Automation Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 激光切割机

Xwboo>Products
Product Categories

Mintec Laser (Beijing/Tianjin)Automation Equipment Co., Ltd.Free·1YRS

  • E-mail

  • Phone

    0086-13012248860

  • Address

    No. 33, Guangyuan Road, Wuqing Development Zone, Tianjin, China

Contact Now

MT-1325PG 300W Gear Rack Transmission High Precision Non-metal CO2 Laser Cutting Machine

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
产品描述:Main Features1.This is a high-end non-metal laser cutting machine according to the standard of fiber laser cutting machine. The machine completely inherits the mature and stable fiber laser cutting machine structure of our company, regardless of high cost and equipped w...
Product Details

blob.png

         Main Features    

      1.This is a high-end non-metal laser cutting machine according to the standard of fiber laser cutting machine. The machine completely inherits the mature and stable fiber laser cutting machine structure of our company, regardless of high cost and equipped with more luxurious configuration,  it is born for the requirements of high-end and higher standard customers.
      2. After the optimization and inheritance of countless generations of products, the problems existing in the current market of similar products are all digested. There is no compromise in the selection of accessories for cost. Fuji servo motor, Shimpo reducer are used. Hybrid servo is not selected for cost (closed-loop stepping).
      3. Unique transmission system, more stable operation characteristics and high precision assembly. CNC gantry machining center precision milling.
      4. It's designed by  professional team, from appearance design to structural design, has gone through countless modifications and improvements. A high-quality goods make certain stand the test of time.
      5. Precision optical holder, can choose water-coolong system, with more stable optical path.
      6. It is equipped with two sets of suction system:double fans down sunction system and auxiliary upper suction system. The fan and air pump are automatically switched on and off to save electricity and less noisy.
      7. Industrial water-cooling laser head, the lens with different diameters and focal lengths can be changed modularly, and the cutting height can be adjusted freely.

      一. Machine Features

      ① Unique transmission mode, achieve good combination in the speed, stability and accuracy. It can meet the requirement of high speed, stability and high precision cutting.

      ② The Y-axis structure completely inherits the mature and stable fiber laser cutting machine structure, high precision gear rack transmission, equipped with the Japan Shimpo reducer. Double drive structure and two Japan Fuji servo motors.

      ③ Precision assembly, CNC machining of bed, industrial machine standard.

      ④ The transmission components were optimized several times, the rigidity and connection mode of the transmission structure and the gantry structure were tested mechanically and the unique design was optimized.Minimizes the vibration of the gantry during high speed movement and braking.

      Remark:Because the laser tube is mounted on the gantry and moves with the gantry, the device vibrates during operation and braking.The stability of the laser tube, especially the folded or combined laser tube of more than 300W, will bring some damage, affect the life of the laser tube or even bring direct damage. In addition, vibration also has great influence on optical path reliability.The  light path in vibration has great influence on the cutting effect and cutting energy.

      ⑤ Adopts Taiwn PMI or HIWIN linear rail guide.

      55.jpg

      齿条海报1 英文副本.jpg

      二、Advantages

      ① Compared with ball screw transmission

      Adopt Y-axis gear rack double drive transmission. Compared with ball screw transmission, the difference is Y-axis transmission.

      Ball screw transmission machine's Y-axis are all single drive transmission in the market. The single drive single ball screw stansmission has the problem of insufficient driving ability.

      The weight of the laser tube of 300W or above is improved, especially after injection of cooling water, the single drive is obviously insufficient power, the acceleration is slow, the brake is hard, and the high-speed performance cannot be satisfied. The final fundamental demand of 300W users is to improve the cutting speed, especially for the cutting of thin materials such as 3mm acrylic plates, which can reach the speed of more than 100mm/s is very difficult for a single drive ball screw laser cutting machine.

      In theory, the ball screw has a high precision, but the ball screw drive has an advantage in short stroke, while in long stroke, there are problems such as insufficient concentricity of the ball screw, which also cannot reach the ideal precision.

      After the actual comparison, our gear rack double drive transmission laser cutting machine 's cutting precision and effect is completely better than full ball screw transmission.

      ② Compared with X-axis and Y-axis are all gear rack transmission

      The biggest problem of gear rack transmission is vibration, solving the vibration problem itself is a difficult problem. XY-axis using gear rack transmission will create more vibration problems, making the problem even more difficult. The problems caused by vibration may not be obvious in the short time (compared with the smoothness of cutting acrylic, problems can be found). After long time vibration, precision effect and laser tube life are fatal problems. XY-axis adopt gear rack, vibration problems will be very prominent. And full gear rack transmission use a lot of economic-type configuration, the problem will be particularly more serious.

      It is proposed that fiber laser cutting machine is full gear rack transmission to prove the feasibility of full gear rack transmission.There isn't any comparison at all. Because fiber laser cutting machine optical path is fiber transmission, the laser is not on the gantry, there is no need to consider the problem of vibration.

      ③ Compared with belt transmission or Y-axis gear rack, X-axis belf transmission

      There is not comparison between them, so do not do a analysis.

      微信图片_20200811105540副本.jpg

    三、Optical specificity and other characteristics 

    ①Adopt 300W high power laser tube, double-tube folding balance cavity structure, laser tube out light regulating head with better laser mode. Marble bracket, dual high voltage design, dual power synchronous power supply, long-time service life and higher stability.

    ②Support high power and more reliable optical lenses. The diameter of the reflector silicon-based gold-plated material is 30mm. Industrial precision optical stand equipped with water-cooling system of lens.

    ③High power water-cooling laser head, focus mirror modular replacement or optional, compatible with a variety of 20/25/30 diameter and a variety of focal length of the focus mirror, cutting gas nozzle height can be freely adjusted.

    ④Patented technical laser head with double blowing design, better improve the quality of the cutting, reduce the risk of fire.

    ⑤Software optical control mode and motion control algorithm optimized for 300W high-speed cutting.Patented technical zero reset mode.

    ⑥More accurate CCD positioning edge cutting function.



    微信图片_20200810105112.jpg齿条海报2 英文副本.jpg微信图片_20200810105121.jpg微信图片_20200810105127.png

    微信图片_20200810105132.jpg微信图片_20200810105137.jpg微信图片_20200810105148.jpg
    微信图片_20200810105152.jpg微信图片_20200810105156.jpg微信图片_20200810105218.jpg微信图片_20200810105224.jpg
    微信图片_20200810105229.jpg齿条海报6 英文副本.jpg


Technical Parameters

Model

MT-L1325PG

Laser type

CO2 sealed laser tube, water-cooled

Laser power

300W

Working area

1200*2400mm

Weight

950kg

Movement speed of machine

0-60000mm/min

Working speed

0-12000mm/min

Speed control

0-99%

Laser energy control

2 options: Software control/Manual adjustment

Laser tube cooling

Forced water cooling(Industrial chiller)

Machine resolution

0.025mm

Min. shaping character

Chinese 2*2mm , English 1*1mm

Max cutting deepth

30mm (For Example: acrylic) As to material

setting positioning accuracy

±0.1mm

Power supply

AC220V±15%  50Hz, Option:AC220V 60Hz 0r AC110V 60Hz

Total power

≤2500W

File format supported

BMP  PLT  DST  AI  DXF  DWG

Transmission

Gear rack double servo motor with Shimpo reducer, Y-axis gear rack and X-axis ball screw transmission

Operating humidity

5%~80%(Air humidity without condensation up to 80%)

Setting positioning accuracy

0℃~45℃

Machine size

3600*2100*1200MM

Software language

Chinese English