Welcome Customer !

Membership

Xiamen Four-Faith Communication Technology Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: 通信设备

Xwboo>Products

Xiamen Four-Faith Communication Technology Co.,Ltd.Free·1YRS

  • E-mail

    info@four-faith.com

  • Phone

    +86-592-5907276

  • Address

    11th Floor,A-06 Area,No.370,Chengyi Street,Jimei,Xiamen,Fujian,China.

Contact Now

Intelligent Temperature Measuring Socket F-TS100

Model
Nature of the Manufacturer
Other
Product Category
NB-IoT
Place of Origin
City, Province
Overview
●Timing temperature detection after power-on, time can be set manually●Local data collection and remote transmission through NB-IoT network●Remote parameter configuration, remote maintenance, and upgrade
Product Details
Chapter 1 Production Introduction

Intelligent Temperature Measuring Socket
 
1. Product Description
 
Intelligent temperature measuring socket F-TS100 is a socket that supports NB-IoT remote control and temperature detection. Supporting the room temperature detection platform independently developed by Four-Faith, it can achieve GIS monitoring, equipment management, real-time temperature monitoring, high & low temperature, offline, and other abnormal alarms. In addition, it can also support alarm processing and other functions.
 
Intelligent Socket
2. Product Features
 
2.1 Collection:
● Timing temperature detection after power-on, time can be set manually.
2.2 Application Scenarios: 
● Hospitals, schools, homes, office buildings, warehouses and, etc.
2.3 Wireless Transmission: 
● Local data collection and remote transmission through NB-IoT network.
2.4 Remote Management: 
● Remote parameter configuration, remote maintenance, and upgrade.
 
Temperature Socket
 
Chapter 2 Installation Instructions
 
1. Use a flat-blade screwdriver to insert the card hole at the bottom of the socket to pry off the cover easily. The card hole is as shown in the figure below.
Note: Please make sure the main power switch is closed before installation
 
2. On the back of the socket, connect the relevant wires according to the silk screen as shown in the figure below
 
3. Use the matching screws to fix the smart temperature measurement socket with the panel removed to the wall junction box, as shown below.
 
4. Cover the panel again after the installation is complete, as shown in the following figure.

Measuring Socket
 
Document Revision History

DateVersionNoteAuthor
2021.7.8V1.0.0Initial VersionYSL
    
    
    
 
 Product Parameters
ItemsContent
Communication MethodNB-IoT
Communication Frequency BandB8, B5*
Voltage250V
Current10A MAX
Stand-by Current3mA @ 220V
Socket Shape5 holes
Dimension86*86*41mm
Protection LevelIP20

Similar Product Recommend