First:product overview
CTA-3A portable laser respirable dust continuous tester is introduced in the laser technology to import the most advanced, fast and accurate measurement of respirable dust particles (PM2.5/PM10) of high performance instruments. The instrument has the characteristics of fast testing, accurate and stable, simple operation, convenient maintenance, no noise pollution, AC and DC dual-use, etc.. The instrument is a portable direct reading instrument light scattering method. The utility model has the advantages of fast testing speed, high sensitivity, good stability, light weight, low noise, simple operation, etc.. The utility model is especially suitable for occasions without external power supply.
The instrument is a new generation of intelligent measuring instrument for the real-time control of the concentration of respirable particulate matter in the air. Applicable to the CDC, health supervision, environmental testing and other departments in real-time monitoring.
Two:measurement principle
According to the standard of China's health industry, this instrument can be used for the determination of inhalable particulate matter (PM2.5/PM10) in public places by light scattering method (WS/T). The instrument is composed of sensors and data processors.
Sensor is the key component of data acquisition,
The principle of this part is to convert the laser beam through a set of aspherical mirrors into a beam of light with uniform distribution of power density,
At the front side of the beam path, a scattered light collecting lens group is arranged on the front of the light beam, and the front focal point falls on the beam path,
When a stream of sampling air passes through the intersection of the laser beam and the front focal point of the scattered light collecting mirror group, the dust particles in the air emit the scattered light corresponding to the physical size,
The scattered light is collected by an optical lens, and is converted into a corresponding electrical signal by a photoelectric conversion device at the rear focal point.
The sample gas inlet is located at the top of the instrument.
The air source is a brushless DC fan.
The data processor will signal sensor collected by electronic cutter will separate particles out, by the microprocessor humidity and concentration conversion.
Results are displayed, stored or printed by the LED monitor.
three:application place
1.environmental monitoring, industrial and mining workshop (mine), steel plant site dust measurement
2.The utility model is suitable for the measurement of dust concentration on the production site of the Labor Department of industrial and mining enterprises
3 monitoring, health and epidemic prevention station of public places of inhalable particles
4, Department of environmental monitoring of airborne particulate detection and investigation of pollution sources
5, scientific research, material performance test on site test
6, on-site dust concentration measurement, dust concentration monitoring
7, drug manufacturing test
8, occupation health and safety inspection
9, factory needs to clean air, precision instruments, testing instruments, electronic parts, food, medicines and other manufacturing process management
10, all kinds of public health research institutions, industrial engineering, meteorology, labor hygiene, air pollution and so on
one:the main technical indicators
1、respirable particulate matter measurement range: 0.001~10mg/m fand;
2、measurement of PM2.5 and PM10;
3、the relative measurement error: less than 10%;
4、sensitivity: 0.001mg/m fand;
5、sampling time: 8 sets of sampling time can be preset, the measurement and stop time of each group can be set within 0~99 minutes;
6、data storage capacity: the system is divided into 10 data storage area, each group of 200 data, a total of 10 areas can be stored in the data set of 2000;
7、with the printer: micro printer, only through the data cable and the host connection, anytime, anywhere direct printing, no longer because there is no AC power and can not print;
8、working power supply: built-in battery, AC and DC dual-use; in the case of sufficient battery power, continuous measurement of 8 hours.
9、host volume: 230mm * 120 mm * 43 mm;
10、the host weight: 610g;
two: product features
Compared with other products, the upgraded version of the instrument has the following characteristics:
1、can detect PM2.5 and PM10, in the true sense of a machine dual-use;
2、large screen LCD Chinese display, display rich in content, LCD with blue backlight;
3、with built-in real-time clock, measurement data with time storage, convenient user statistics and analysis;
4、can be measured through the serial port data transmission to the computer;
5、micro printer, no external power can print data;
6、can store up to 2000 sets of data.
7、each group of measurement and stop time within 0~99 minutes can be set up to achieve continuous detection