DRK-07E Fabric radiant heat protection tester

Product details

Specifications：

1. Radiation source: composed of six groups of SiC heating rod, the total length of the heating rod is 356mm±2mm, the length of the heating part is 178±2, the diameter of the heating rod is 7.9±0.1mm;

2. The radiation source adopts PID temperature control, temperature control precision is ±1℃;

3. Radiation source heating capacity: maximum 1200℃±5%, using PID controller;

4. Radiation source heat radiation flux: 10 ~ 80 kW/m2;

5. The sampling frequency of data acquisition card can reach 20 HZ;

6. Equipped with commercial quartz window heat radiation flux sensor (with water circulation device), the maximum measurement range is 100KW/m2;

7. Equipped with copper plate calorimeter device, used to detect the temperature rise changes on the back of the sample;

8. Copper plate calorimeter is made of imported high conductivity pure copper without oxygen;

9. Equipped with method A type sample clip and method B type sample clip;

10. The sample moving device, can move freely on the operating platform;

11. Equipped with computer + English Windows XP operating system, test parameters are set by software, automatic start test, can automatically measure the temperature rise 12℃ ａnd 24℃ required test time, heat flux Q and heat transfer coefficient HF;

Size(L * W * H cm)：95*66*31

Weight (kg)：110

Installation requirements：

1. Electrical requirements:  220V, 50HZ, 15A;

2. Air source requirements:  press gas

3. The test environment:  10°C ~ 30°C

4. Operation:  landing

5. Smoke discharge pipeline

Configuration：

1. Host machine;

2. One brａnd computer;

3. One copper plate calorimeter;

4. One radiation flux sensor for calibration;

5. Professional software test kit: First-degree burn and second-degree burn curve;

6. One copy of product manual;

Working principle:

1. Central unit for auto calibration from 5 to 80 kW/m2 and fully         automatic measuring process (times to achieve temperature rise of 12, 24 and 30 °C).

2.Specimen holders for standard test A and test B with a calorimeter.

3.LCD display for adjustments and results.

4.Built-in printer.