DRK643 salt spray test chamber（box oven）

Product details

Equipment Introduction:

1, water spray testing machine, is for all kinds of material surface treatment, including coating, electroplating, organic and inorganic skin film, anodic treatment, anti-rust oil, into the corrosion resistance of the quality of treatment, and then achieve long time corrosion resistance of products.

Features:

The whole adopts imported P.V.C board system, the inner box adopts advanced ring three-dimensional reinforcing technology, strong structure, never deformation.

◆ The temperature of the laboratory is heated on five sides, which can ensure the temperature uniformity of the laboratory (±1℃).

2, the equipment structure and working principle: using benoit's theorem to absorb salt water and atomizing, will make the fog diffusion speed double, and naturally fall on the test piece, the fog fall difference can be controlled at ±0.3mml/min80cm2H saturated air using Henry's law, in order to heat and humidification, and provide the humidity required by the laboratory.

Humidity is the prerequisite to directly affect the corrosion rate, the company adopts the TEMPERATURE controller of P.I.D mode, the control error is within ±0.5℃. The only use of full detection system, fault occurs, can be on the light display.

3. Overall structure

A :

◆ Dimensions: 107*60*118mm (W*D*H)

◆ Cavity size: 600*450*400mm (W*D*H)

◆ Test chamber capacity 108L

B:

◆ Dimensions: 1410*880*1280mm (W*D*H)

◆ Cavity size: 900*600*500mm (W*D*H)

◆ Capacity of test chamber 270L

Equipment function requirements:

Meet the salt spray corrosion test for the metal parts of the battery.