DRK-ZW-P UV Lamp Aging Box Chamber

Product details

Technical Parameters

  Equipment Name: UV Lamp Aging Test Chamber

  Model: ZW-P

  Temperature and humidity control instrument : Yudian LED intelligent controller

  Dimensions: 1300mm × 500mm × 1460mm length * width * height

  Studio size: 1140mm × 400mm × 380mm length * width * height

  Standard test piece size: 75 × 150mm, a total of 24

  The center distance of the tube is: 70mm

  Center distance between test article and lamp: 50±3mm

  Wavelength range UVA340 wavelength range: 315~400nm, peak value is around 340

  UVB313 has a wavelength range of 280~315nm and a peak value of around 313.

  Temperature range Normal temperature: +10~70°C adjustable

  Temperature resolution: 0.1°C

  Temperature fluctuation: ±0.5°C

  Temperature uniformity: ±2°C

  Housing material: stainless steel (or cold plate spray)

  Studio material: SUS#304 stainless steel plate.

  Wiring method in accordance with international electrical standards

  Protection device: Over temperature protection, humidification and water shortage protection

  Power supply:  AC220V/50Hz/4.5KW

  Weight about: 150kg

Main Accessories List

1. Temperature control

2. Ultraviolet Lamp Tube Q-LAB USA

3. AC contactor Shanghai Delicious Group

4. Intermediate relay OMRON, Japan

5. Timer

6. Over temperature protection

7. Solid State Relay SSR Taiwan Yangming FOTEK

8. Temperature Sensor, Xuan Rong, Taiwan

9. Leakage Switch Shanghai Delicious Group

Conditions of use of equipment

1. Power requirements

Voltage 220V + 10%, single-phase three-wire system, 50/60Hz, current 8A.

2. Environmental requirements

The working environment temperature is 5-35 C and the humidity is 0-80% RH. The laboratory is well ventilated, the level of the site is good, there is no strong electromagnetic interference, no high concentration of dust and corrosive substances, no direct sunlight or other heat source radiation. Keep away from combustibles and explosives.

3. Other requirements

The work area is about 234 x 353 cm. Water supply and drainage equipment are needed near the equipment.

4. Quality Assurance System

The company strictly complies with the requirements of ISO 9001 quality management system, ISO 14001 environmental management system and European CE product certification.

Equipped documents and accessories

5. A Certificate of Product Qualification

6. A Product Instruction

7. A Instruction for the Use of Control Instruments

After-sales Technical Service

1. Under the condition of abiding by the precautions, installation and use rules of the product, the product will be guaranteed free of charge within two years from the date of shipment due to the quality of the product itself, and will be responsible for lifelong maintenance service.

2. The imported ultraviolet lamp tube belongs to the normal test consumables. The ultraviolet radiation emitted by the imported ultraviolet lamp tube will be greatly reduced after its life is exhausted. It is not covered by two-year free warranty.

3. If there is a quality problem in the product, the telephone reply should be made within 15 minutes after receiving the call (or fax) for repair. If the problem can not be solved in the phone, the professional maintenance personnel of our company will come to the door within 24 hours to deal with it.

4. Our company provides free product use, maintenance consultation and technical consultation services for users for a long time. Our company has a special training department, which regularly trains technicians, salesmen and customer users to troubleshoot equipment failures for users in the shortest time and ensure the smooth progress of users'work.

5. Provide spare parts for a long time outside the warranty period, and the charging standard is reasonable (the corresponding fee is only charged according to the cost price of spare parts outside the warranty period).