DRK821A Liquid water dynamic transfer tester
Product details
Technical parameters:
1. The test data: microcomputer control, the underlying wetting time, surface wetting time, the underlying maximum moisture absorption rate, surface moisture absorption rate, the bottom radius of moisture absorption, surface radius of moisture absorption, low level moisture diffusion velocity and surface moisture diffusion velocity, accumulated a single flow passing ability, overall liquid water management ability.
2. Liquid conductivity: 16ms±0.2ms;
3. Test liquid throughput: 0.2±0.01g(or 0.22ml), test liquid tube diameter 0.5mm;
4. Upper and lower sensors: 7 test rings, each ring spacing: 5mm±0.05mm;
5. Test ring: composed of probe; Upper probe diameter: 0.54mm±0.02mm, lower probe diameter: 1.2mm±0.02mm;
Number of probes per ring: 4, 17, 28, 39, 50, 60, 72;
6. Test time: 120s, water inlet time: 20s;
7. Test head pressure < 4.65n ±0.05N (475GF ± 5GF), data acquisition frequency > 10 hz;
8. One button to start the test, click start motor automatically drive the test head to the specified position, built-in pressure detection device, to fixed pressure automatically stop, start the test, the test automatically return after the end;
9. Equipped with droplet injection system, the droplet is accurate and stable, with reverse pumping system can reverse rotation, the remaining brine in the infusion tube is pumped back to the storage tank, to prevent the brine from crystallizing and blocking the pipeline;
10. Power supply: AC 220V, 50Hz, power: 4KW;
11. Weight: 80kg;
Configuration list:
1、Host One
2、Conductive rubber One
3、Product certificate One
4、Product instruction manual One
5、Delivery note One
6、Acceptance certificate One
7、Product picture album One
Selected listing:
1、Conductivity tester One
2、Ultrasonic cleaning machine One