DRK228 Medical protective clothing blood synthetic penetrability tester

Product details

Technical specifications and configuration

1. The instrument adopts an air source that can provide (0.5 ~ 30±0.1) kPa pressure to continuously pressurized the sample, which is not restricted by the space of the test site;

2. The air pressure range can be adjusted freely, and the adjustment range (0.5 ~ 30) kPa;

3. Color touch screen display and operation;

4. The sample clamping pad is processed with imported special aluminum profiles, which is light in material, clean in surface and never rusts.

5. The instrument adopts imported special aluminum wire drawing panel, equipped with metal keys, sensitive operation, not easy to damage;

6. Clamping device for instrument samples, equipped with locking protection, to prevent the synthetic blood from splashing around;

7. Clamping force is accurate and reliable;

8. The test tank is equipped with a special placement device, which is convenient for customers to operate;

9. The test tank is processed with special 316 stainless steel, and the top is equipped with a special cover for high transparent protection;

10. The washer below the sample is made of high-quality PTFE material after special processing;

11. Square metal block net: open space ≥50%;Bending ≤5mm at 30kPa;

12. Instrument time control accuracy ≤01 seconds;

13. The shell of the instrument is made of high-quality metal baking paint, which is beautiful and generous.

14.Equipped with printer interface, connected to the printer can directly print data reports.

Technical standard:

ASTMF 1670: Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood.

ASTMF 1671: Stanadard Test Method for Resistance if Materials Used in Protective clothing to Penetration by Blood-Borne Pathogens Useing Phi-X174 Bateriophage Penetration as a test system.

ISO 16603: Clothing for protection against contact with blood and body fluids--Determination of the resistance if protective clothing materials to penetration by blood and body fulids--Test method using sysnthetic blood.

ISO 16604: Clothing for protection against contact with blood and body fulids--Determination of resistance of protective clothing materials to penetration by blood-borne pathogens--Test method using Phi-X174 bacteriophage.

ASTMF 903--Standard Test Method for Resistance of Materials used in Protective clothing to Penetration by Liquids.

Technical parameters:

1. Sample size: 75mm×75mm

2. Test area: 28.26 square centimeters

3. Air pressure adjustment range (0.5 ~ 30) kPa

4. External size: 500mm×500mm×500mm (L×W×H)

5. Weight of the instrument: 40 kg

6. Power supply: AC220V, 50Hz,

Scope of supply: 1. One main machine;2. Two PTFE gaskets;3. Two ordinary washers;4. One metal blocking net;

A set of special locking tools;6. One high-quality silent air pump, [note: safety production license is not included].7. Equipped with printer interface;8. One sample template;9. One product certificate;10. One copy of product operation manual.

Operation instruction:

Insert the air pump output pipe into the oil and water separator of the instrument as required (pressure 0.1-0.3mpa).

After switching on the power, the startup interface (name of the device) is displayed. Press the "ENTER" button to ENTER the test interface, as shown in the following figure:

Click “setting" button，get into parameter setting screen, as below

This screen can set the system time, date and testing time, after setting, click “save" button to keep the setting data.(note: it require 5 minutes in the standard)