DRK506 Particle Filtration Efficiency Detector(PFE)

Product details

Introduction

Medical surgical mask particle filtration efficiency PFE tester is suitable for medical instrument inspection center, safety protection inspection center, labor protection inspection center, drug inspection center, disease prevention and control center, textile inspection center, hospital, mask and respirator manufacturers, etc.

Features

The PFE tester for particle filtration efficiency of surgical masks is equipped with a special salt aerosol generator, which can produce aerosols with specific particle size and concentration.

Equipped with a series of special fixture, suitable for the detection of all kinds of masks.

Built-in high life photometer module, sampling time accumulation, prompt light cleaning.

Automatic control of aerosol generation, automatic calculation of capture efficiency and mask airflow resistance, reduce human intervention.

PC control with Drick software, easy to operate and save the test report!

Built-in high precision electronic flowmeter and high performance sampling pump to ensure flow stability.

Parameter 

1.Test flow: parameter range: (5 ~ 100) L/min;Resolution :(5 ~ 100) L/min;Maximum allowable error: ±1%

2.Pressure detection range: parameter range: (0 ~ 2500)Pa;Resolution: 0.1Pa;Maximum allowable error: ±1%

3.Concentration detection range: parameter range: (0.001 ~ 100) 0 g/L;

4.Detection accuracy: 1% of the read value in the range of 0.01% to 99%

5.Detection repeatability: 5% of the read value in the range of 0.01% to 99%

6.Operating temperature: 20±5℃

7.Instrument noise: <60dB(A)

8.Power supply: AC220V±10%, 50Hz

9.Main machine size :91X80X173cm

10.Using laser particle counting method, the minimum particle diameter is 0.1 micron

Standard

ASTM F2100, ASTM F2299

Main Configuration Photoes