DRK453 Protective clothing anti-acid and alkali test system-protective clothing penetration time tester
Product details
1. Main purpose
According to the national standard GB 24540-2009 "Protective clothing acid-base chemical protective clothing", this equipment uses the conductivity method and automatic timing device to test the penetration time of the fabric acid-base chemical protective clothing. The sample is placed between the upper and lower boards , The conductive wire is connected to the upper board and is in contact with the upper surface of the sample at the same time. When the penetration phenomenon occurs, the circuit is turned on, an electrical signal is sent out, and the time is recorded. The period from when the test solution is dropped into the sample to when the signal appears is called The penetration time of the sample.
2. Main technical indicators
Test Conditions | Temperature (17-30)℃, relative humidity: (65±5)% |
Sample size | 100mm×100mm |
Test solution | 0.1mL (conductive method) or 10mm high (indicator method) |
Instrument specifications | 240mm (length) × 180mm × 200mm (height) |
Standards compliant | GB 24540-2009 "Protective clothing, protective clothing for acid and alkali chemicals" |