DRK101 Medical mask universal tenstile testing machine

Product details

Introduction

Shandong DRICK independently research and development this comprehensive testing machine for surgical mask &protective clothing, it is widely used in a variety of mask strength detection projects.

Features

Comply with national standards, medical standards testing requirements, automatic software control system, meet the requirements of data storage, printing, comparison.

The imported servo motor is equipped with precision screw drive system to ensure the stability of test data.

Test standards:

GB 19082-2009 technical requirements for disposable protective clothing for medical use

(4.5 breaking strength - the breaking strength of materials in key parts of protective clothing should not be less than 45N)

(4.6 elongation at break - the elongation at break of key parts of protective clothing should not be less than 15%)

Self-priming filter respirator for respiratory protection articles

5.6.2 breathing bonnet - breathing bonnet shall be subject to axial tension

"Disposable mask: 10N for 10s" "replaceable mask: 50N for 10s")

(5.9 headbａnd - headbａnd should bear the tension "disposable mask: 10N, 10s"

"Replaceable half mask: 50N for 10s" "full mask: 150N for 10s")

5.10 joints and connecting parts - joints and connecting parts shall be subject to axial tension

"Replaceable half mask: 50N for 10s" "full cover 250N for 10s")

GB/T 32610-2016 technical specification for daily protective masks

(6.9 breaking strength of the mask belt and the connection between the mask belt and the mask body ≥20N)

(6.10 fastness to breathing bonnet: no slippage, breakage or deformation shall occur)

YY/T 0699-2013 disposable surgical mask

(4.4 mask belt - the breaking force at the connection point between each mask belt and the mask body is not less than 10N)

YY 0469-2011 surgical mask for medical use (5.4.2 mask belt)

GB/T 3923.1-1997 determination of breaking strength and elongation at break of fabrics (strip method)

Disposable rubber inspection gloves (6.3 tensile properties)

EN149---Respiratory proective devices--Filtering half masks to protect against 

particles-Requirements,testing,marking 

EN14683---Medical face masks--Requirments and test methods

Instrument technical parameters:

Specification: 200N (standard) 50N, 100N, 500N, 1000N (optional)

Accuracy: better than 0.5

Resolution of force value: 0.1n

Deformation resolution: 0.001mm

Test speed: 0.01mm/min ~ 2000mm/min (stepless speed regulation)

Width of sample: 30mm (standard fixture) 50mm (optional fixture)

Clamping of samples: manual (pneumatic clamping can be changed)

Stroke: 700mm (standard) 400mm, 1000mm (optional)