DRK-716 Falling Ball Impact Testing Machine

Product details

Product Introduction

This machine adopts DC electromagnetic control method. The steel ball is placed on the electromagnetic suction cup and the steel ball is automatically sucked up. According to the falling key, the suction cup instantly releases the steel ball. The steel ball will be tested for free fall and impact on the surface of the test piece. The drop height can be adjusted up and down, and a height scale is attached to know the drop height of the parts. With a specified weight of the steel ball, at a certain height, free fall, hit the sample, depending on the degree of damage. Meet the standard: in line with GB/T 9963-1998, GB/T8814-2000, GB/T135280 and other standards.

Product Features

DC electromagnetic chuck adsorbs steel balls, which is safe and reliable.

The chassis is made of punched A3 steel plate by electrostatic spraying.

Various test balls are available.

Drop height depends on scale steel ruler, intuitive and easy to read.

Various types of steel balls are available.

Technical Parameters

Impact height: 20-1900mm adjustable

Drop Height Scale: Minimum Indicator 1cm

Ball weight selection: 112, 198, 225, 357, 533g

Control mode: DC electromagnetic control

Volume: about W450 x D500 x H2200 mm

Weight: about 35Kg

Power supply: AC220V 1A

Standard Configuration

1. Main engine of drop test machine

2. One set of steel balls

3. Fixture 1 pair