Plastic pipe opacity tester

Product details

Product introduction

Pipe opacity tester can be used to measure the opacity of plastic pipes and fittings. The results are shown in percentage form.The instrument is fully automatic, four samples are tested each time, 12 measuring points (three points for each sample) are identified automatically, positioning, tracking and moving are tested.

Standards

GBT21300-2007 <<determination of the opacity of plastic pipes and fittings>>, ISO7686:2005, IDT

Features

1. fully automatic operation, convenient and quick.

2. high accuracy and stable performance.

3. power on can be tested without preheating.

4. Automatic replacement of gratings, easy to operate: five gratings are built into the machine, as long as the specifications of the sample are selected, the control system will automatically move the grating to the north of the sample.

5. The measuring range is wide. It can measure DN16mm, DN20mm, DN25mm, DN32mm and DN40mm five sizes of pipes.

6. Four samples and twelve measuring points can be measured at the same time, which eliminates the tedious operation of replacing the sample.

7. The speed of entering and leaving the warehouse is fast. The measuring instrument adopts the driving mode of ball screw, which can not only greatly improve the speed of entering and leaving the warehouse, but also reduce the inertia caused by the longitudinal movement, thus reducing the measuring error.

8. the test time is short, and a complete test takes only 10 minutes.

Parameters

1. Diameter range: 16 ~ 40; 16, 20, 25, 32, 40.

2. Sample length: 80mm

3. The number of samples: 4

4. sample rack: 5, automatic positioning.

5. Automatic sample positioning accuracy: + 0.1mm

6. Each test time: about 10 minutes.

7. Grating: 16, 20, 25, 32, 40, 5.

8. Raster tracking and positioning: automatic and corresponding to the sample.

9. Entry and exit: automatic

10. Drive mode: motor + ball screw

11. Speed of entering and leaving warehouse: 200mm/min

12. Mobile distance of entry and exit: 170mm + 1mm

13. Automatic sample tracking speed: 200mm/min

14. Microcomputer control (touch screen) automatic analysis, recording and display

15. Dimension size (long width and height) 670*550*660mm.

16. Power 220V,

17. Luminous flux resolution + 0.01%, and the accuracy of reading is better than 0.05%.

18. Simultaneous test of 4 samples of same specification.

19. Light source: LED energy saving standard light source wavelength range 540-560nm, resolution 0.01%, accuracy is less than or equal to 0.5%