DRK-7007B Opening mill machine（electrical heating)

Product details

Summary

This machine is specially designed for rubber industry and plastic products rubber blending experiment machine. It has the characteristics of light weight, small volume, simple structure, convenient operation, low power consumption, convenient use and maintenance, etc.

Parameter

Roller diameter：160 mm                                 

Roller working face length：320 mm                        

Roller spacing：0.1－5 mm

Roller speed ratio：1 ：1.22  

Rear roll speed：8.03米/分 (meter/min)

Front roll speed：9.80 米/分  (meter/min)

Material loading each time：1－2 KG

Reducer type：BWO220-23-5.5KW                       

Overall size：1000*760*1300mm

Heating : electrical heating                  

Temperature：common temp.－250℃ The temperature figure shows that it is adjustable.

Temp. fluctuation ：less than 0.5 ℃          

Weight：1ton        

Main structure

This machine mainly has the transmission, the main engine part, the roll distance, adjusts the device, the emergency brake device and so on composition. The small sprocket drive the large sprocket on the rear roller shaft, and then the speed ratio gear at the other end of the rear roller drives the speed ratio gear on the front roller to make the front and rear roller turn in the opposite direction. In order to ensure the safety of operation, the machine is equipped with emergency rod, braking with reverse braking mode, safe and reliable.

DRK-7006-J

Flat plate vulcanizing machine (instrument type) 

Main parameter

Nominal die force:  25T

Hot plate specification:  350×350mm

Hot plate distance:  75mm
working layer: two layers, one is hydrocooling another is heating
maximum hydropress force: 14.5MPa
Hot plate unit area pressure: 2MPa
plunger lift:   200-250mm（other size can be customized）
heating mode:   Electric heating

power:  1.5KW
overall size:（L×W×H） 1250×550×1420mm
weight: 1.2T

DRK-4025 Lever punching machine

usage:

Suitable for punching rubber, plastics, film, leather and other special materials into various standard test pieces for use in material testing machine.

Parameter:

cut-off knife

Equipment description: for various standard rubber, plastic and other non-metallic test pieces cutting production (can also be customized).

Parameter